EQUIPMENT DESCRIPTION The cream machine consists are the following parts; base, pan, inner paddle, outer paddle, and paddle bar. BASE NNER PADDLE OUTER PADDLE (Note projection on outside of paddle) PADDLE BAR Leader Maple Cream Machine Year: 2014 Page: 3...
(Case of 1 qty: 125) lb. qty: 12) Optional Equipment, Spare Parts and Reference Materials ITEM LEADER DESCRIPTION/PHOTO ITEM LEADER DESCRIPTION/PHOTO ORDER # ORDER # Polder Digital 61012 Pan Only 582002 Scale Leader Maple Cream Machine Year: 2014 Page: 4...
1. Place the cream machine on a stable surface. Place the pan on the cream machine. Align the pan with the tabs of the base. The cream machine turns clockwise BASE PAN MOUNT PAN MOUNT AND PAN TAB Leader Maple Cream Machine Year: 2014 Page: 5...
Page 6
Line the Paddle Bar Alignment Groove with the paddle bar. Line the Thumbscrew Alignment Groove with the thumbscrew and so it points to the thumbscrew. Leader Maple Cream Machine Year: 2014 Page: 6...
Page 7
8. When you start the cream machine ensure the paddles are not scraping the actual surface or side of the pan. Adjust paddles as necessary. Leader Maple Cream Machine Year: 2014 Page: 7...
Manually turn the machine in a clockwise direction for a minimum of two turns so as to prevent wear on the screws and motor shaft. Repeat Step 7. 8. Turn off the cream machine. 9. Remove the paddle bar assembly. Leader Maple Cream Machine Year: 2014 Page: 8...
FEEDBACK Please use the following e-mail address (feedback@leaderevaporator.com) to suggest improvements or enter comments on this document. Reference the document title in your note. You may also contact LEADER Customer Service. NOTES Leader Maple Cream Machine Year: 2014 Page: 9...
Need help?
Do you have a question about the MAPLE CREAM MACHINE and is the answer not in the manual?
Questions and answers