Perfomance Tool W2019A Owner's Manual
  1. Manuals
  2. Brands
  3. Perfomance Tool Manuals
  4. Soldering Gun
  5. W2019A
  6. Owner's manual

Perfomance Tool W2019A Owner's Manual

Heavy duty soldering gun kit
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
HEAVY DUTY SOLDERING GUN KIT
Stock Number W2019A
OWNER'S MANUAL
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO
MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm. An example of this type of chemical is lead from lead based paints. Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure: work in a well ventilated area and work with approved safety equipment, such as dusk masks
that are specially designed to filter out microscopic particles.

Advertisement

Table of Contents
loading

Summary of Contents for Perfomance Tool W2019A

  • Page 1 HEAVY DUTY SOLDERING GUN KIT Stock Number W2019A OWNER’S MANUAL WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

  • Page 2: Specifications

    SPECIFICATIONS Electrical: .......... 120 V AC, 60 Hz, .07A Line Cord: ............55 in. 2 Prong Specifications are subject to change without notice IMPORTANT SAFETY INFORMATION WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
  • Page 3 IMPORTANT SAFETY INFORMATION 9. When operating a power tool outside, use an outdoor extension cord marked “W-A” or "W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock. 10. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 4 IMPORTANT SAFETY INFORMATION 21. Use clamps (not included) or other practical ways to secure and support the work- piece to a stable platform. This is more secure than using your hands, and leaves both hands free to work with the tool. Holding the work by hand or against your body is unstable and may lead to loss of control.

  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    IMPORTANT SAFETY INFORMATION GROUNDING WARNING: Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.

  • Page 6: Operation

    IMPORTANT SAFETY INFORMATION 3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Figure C.) 4. When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required.

  • Page 7: Maintenance

    OPERATION 3. Apply solder to the wire splice or metal to be soldered, not the Soldering Tip. When the splice or metal is hot enough, it will melt the solder causing it to flow within the splice or between the metal surfaces. 4.
  • Page 8 LIMITED WARRANTY PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.

Table of Contents