cause it to become jammed or damaged.
There is a risk of injury and risk of damage
to property. Only use the jack to attach an
emergency or spare wheel in the event of
a breakdown.
Warning
On soft, uneven or slippery ground, for ex-
ample snow, ice, tiles, etc., the vehicle jack
can slip away. There is a risk of injury. If
possible, change the wheel on a flat, solid,
and slip-resistant surface.
Warning
The vehicle jack is optimized for lifting
the vehicle and for the jacking points on
the vehicle only. There is a risk of injury.
Do not lift any other vehicle or cargo using
the vehicle jack.
Warning
If the vehicle jack is not inserted into the
jacking point provided for this purpose,
the vehicle may be damaged or the vehicle
jack may slip when it is being cranked up.
There is a risk of injury or risk of damage
to property. When cranking up the vehicle
jack, ensure that it is inserted in the jack-
ing point next to the wheel housing.
Warning
A vehicle that is raised on a vehicle jack
may fall off of the jack if lateral forces are
exerted on it. There is a risk of injury and
risk of damage to property. While the ve-
hicle is raised, do not exert lateral forces
on the vehicle or pull abruptly on the vehi-
cle. Have a stuck wheel removed by a deal-
Online Edition for Part no. 01402628632 - VI/19
Wheels and tires
er's service center or another qualified
service center or repair shop.
Securing the vehicle against rolling
General information
The vehicle manufacturer recommends to
additionally secure the vehicle against roll-
ing away when changing a wheel.
On a level surface
Place wheel chocks or other suitable objects
in front and behind the wheel that is diago-
nal to the wheel to be changed.
On a slight downhill gradient
If you need to change a wheel on a slight
downhill grade, place chocks and other suit-
able objects, for instance a rock, under the
wheels of both the front and rear axles
against the rolling direction.
MOBILITY
281
Need help?
Do you have a question about the COUNTRYMAN PLUG-IN HYBRID and is the answer not in the manual?