Advertisement
Quick Links
WITH OUR ADVANCED PET DOOR SECURITY COVER
INSTALLING YOUR NEW WATCHDOG SECURITY PET DOOR COVER
WE ALWAYS RECOMMEND INSTALLING YOUR WATCHDOG SECURITY PET
DOOR COVER ON THE OUTSIDE FOR MAXIMUM SECURITY, HOWEVER IT
CAN BE INSTALLED ON THE INSIDE AS LONG IT IS SECURELY FASTENED.
LEVEL, PENCIL, HEX BIT WRENCH FLAT HEAD SCREWDRIVER & "LOCK
TITE" (FOR DOOR ENTRY DOOR INSTALLATION) &
1) INSTALLATION ON TO AN ENTRY DOOR:
- USE PROVIDED TAMPER RESISTANT SCREWS & TEE NUT
ALSO RECOMMENDED TO THREAD THE BOLT WITH "LOCK-TITE"
-
(NOT INCLUDED – CAN BE FOUND AT YOUR LOCAL HARDWARE
STORE) TO PROVIDE ADDITIONAL SECURITY FROM BOLT AND
PROTECT YOUR HOME & FAMILY AND
"LOCK IT UP"
TOOLS NEEDED (NOT INCLUDED IN BOX)
APPROPRIATE DRILL BIT & DRILL.
CHOOSE TYPE OF INSTALLATION METHOD
Advertisement
Related Manuals for WatchDog LOCK IT UP
Summary of Contents for WatchDog LOCK IT UP
- Page 1 PROTECT YOUR HOME & FAMILY AND “LOCK IT UP” WITH OUR ADVANCED PET DOOR SECURITY COVER INSTALLING YOUR NEW WATCHDOG SECURITY PET DOOR COVER WE ALWAYS RECOMMEND INSTALLING YOUR WATCHDOG SECURITY PET DOOR COVER ON THE OUTSIDE FOR MAXIMUM SECURITY, HOWEVER IT CAN BE INSTALLED ON THE INSIDE AS LONG IT IS SECURELY FASTENED.
- Page 2 - YOU WILL ALSO NEED A 3/8” MASONARY DRILL BIT AND FLAT HEAD SCREWDRIVER OR BIT (NOT INCLUDED). ----------------------------------------------------------------------------------- INSTALLATION OF YOUR NEW WATCHDOG SECURITY PET DOOR COVER FOR THE BEST RESULTS, THE WATCHDOG SECURITY PET DOOR COVER MUST FIT FLUSH TO THE WALL OVER THE EXISTING PET DOOR FRAME.
- Page 3 2) WITH A LEVEL CHECK TO SEE IF YOU’RE EXISTING PET DOOR IS LEVEL IF IT IS YOU CAN USE IT TO LEVEL YOUR WATCHDOG SECURITY PET DOOR. IF YOUR EXISTING DOOR IS NOT LEVEL IT MAY NOT BE SQUARE, YOU MAY NEED TO...
- Page 4 3) REMOVE THE DOOR AND DRILL THE CORRECT SIZE HOLE WHERE MARKED. THE SIZE OF THE HOLE WILL CHANGE BASED ON APPLICATION OF FASTENERS. 4) INSTALL THE TAMPER RESISTANT SCREWS OR BOLTS. (DO NOT TIGHTEN YET, YOU MUST ALIGN AND DRILL THE REMAINING THREE HOLES).
- Page 5 5) LEVEL THE DOOR AND REPEAT STEPS TO MARK, DRILL & TEMPORARILY INSTALL UPPER CORNERS WITH TAMPER RESISTANT SCREWS. NOW MARK BOTH BOTTOM HOLES, REMOVE DOOR, AND DRILL THE BOTTOM TWO HOLES. YOU ARE NOW READY TO INSTALL THE FRAME. FIRMLY TIGHTEN THE SCREW HARDWARE TO COMPLETE THE INSTALLATION.
- Page 6 (also in “as-new” condition). All instruction manuals, accessories, parts, etc. which came with the original shipment must be returned. Prior to returning items, please call Watchdog Security Pet Doors at 800-242-5093 in order to receive shipping instructions and a RMA number. Refunds will be issued after the equipment is received, inspected and verified to be in good working condition.
-
Page 7: Lock Instructions
Lock Instructions...