Restart And Scan Sd Memory - inout NP10 How To Update Firmware

Now refresh the browser web page and check the device information page that the update has been successful.
Now we advise you to perform the following restart and scan the contents of the SD memory to realign all the stored
contents.
1. Connect to the NP10 web page and log in.
2. Select the "Service" web page and follow the instruction present in this page.
3. Select the "System Reboot and Scan SD content" button and confirm ok.
4. Wait 1 minute for the player to complete the update cycle.
5. Refresh the browser web page and continue with the programming of the NP10 player.