Powercom RF2 Quick Reference

WRS7200-DSI and Base WRS970-DSI-H / WRS971-DSI-H
Power on keypad: Press Power Key
I. LCD Display
CH: This shows the channel number you are on.
ID: This shows your keypad's ID number.
Battery: This displays your battery life.
123: Question type. (See 5. a)
1.
Check and X: If it displays a check, then you answered
correctly. If it displays an X, then you answered incorrectly.
2.
Key: If you see this symbol then that means the base
station requires a login password.
3.
Up and down half arrows:
keypad is transmitting information to the base station.
The down arrow means the base station is transmitting
information to the keypad.
4.
Reception: This shows you how strong your reception to
the base station is.
www.PowerComARS.com 1-877-DSINFO7 (374-6367) You can pre-arrange a stand by
support by email powercom@dsii.net
PowerCom RF2 Keypad
DEL key
Search/Scan/Link Key
The up arrow means that the
LCD
Soft Key
SEND Key
Symbol Key
Power Key
II. How to access the LCD keypad menu:
1.
Press the Link key and DEL key simultaneously to access
the keypad menu. Press the soft key right and left button
to locate the menu item.
2.
Press middle soft key to enter, select the setting and press
SEND to save.
3.
Press DEL key to return to the main menu.
Note:
Do not connect keypad to base when keypad settings
are being changed.
III. Address Mode:
must be configured to the same mode, as they are
not interoperable.
Note:
Power off and then on keypad again after address
mode is changed to alter the settings.
You can pre-arrange a stand by support by email powercom@dsii.net
POWERCOM
Quick Reference
Both the base and the keypads
01/2013
RF2
®
PAGE 1