Parts And Controls; Before Using Your Appliance For The First Time; Making Tea - Bosch TTA2 Series Instruction Manual

Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.

Parts and controls

Fig. 1
1 Base
2 Kettle with water level indicator
3 Calcification filter (detachable)
4 Teapot (dishwasher-safe)
5 Tea filter (dishwasher-safe)
6 Lid for teapot (dishwasher-safe)
7 Lid (bayonet lock)
8 Selection button
(boil E / keep warm F)
9 Indicator light
10 On/Off switch
11 Illuminated ring
12 Cord store
Important:
– Use kettle only with base which is marked
with type WK5.
– Fill the kettle with water only. Milk or
instant products will burn and damage the
appliance.
– Do not operate the kettle without water
or overfill, observe min and max marks
(Fig. 5a).
– Use the kettle with attached teapot or lid
only, otherwise the kettle will not switch
automatically to keep warm F.
– If the kettle is not being used, always
switch off with the switch or unplug.
Before using your appliance
for the first time
■ Unwind the power cord to the required
length and plug in.
■ Fill the kettle with fresh water, attach the
lid and place on the base.
■ Switch on the appliance by pressing
down switch (Fig. 2).
■ Set the selection button to boil E (Fig. 3).
■ When the water has boiled, the selection
button automatically switches to
keep warm F (Fig. 4).
Info: The illuminated ring comes on while
the water is boiling and goes out as soon
as the water has boiled. The indicator light
comes on during the warming function only.
■ Repeat the process twice in order to
clean the kettle.
■ Rinse the teapot with lid and tea filter.

Making tea

Fig. 5
The preparation of Turkish tea is described
here. Other types of tea may become bitter
due to the long steeping time.
■ Fill the kettle with water, observe min and
max mark.
■ Place the kettle on the base and set the
selection button to boil E.
■ Fill the tea filter approx. ⅓ full of Turkish
tea and insert into the teapot.
■ Place the teapot on the kettle. Switch on
the appliance by pressing down switch.
The illuminated ring lights up.
■ As soon as the water has boiled, the
selection button automatically switches
to keep warm F. The indicator light
lights up.
■ Now fill the teapot with the hot water and
refill the kettle with fresh water.
■ Place the teapot on the kettle and the
kettle on the base. Set the selection
switch to boil E.
■ As soon as the water has boiled, the
selection button automatically switches to
keep warm F.
en
9