Platinum Tools J Series Install Instructions

Installing Platinum Tools ® J Hooks

Mounting to a wall: JH12, JH21, JH32 and JH64

Secure the hook to the wall with a mounting anchor* appropriate to the surface you
are mounting it to, such as a screw or a toggle bolt.

Mounting to a Rod: JH12W, JH21W, JH32W and JH64W

Secure a batwing spring steel clip* to the J Hook using an appropriate fastener such
as a bolt or a rivet. Depress the batwing between your fingers and attach it to the
threaded rods as shown.
Mounting to a Rod with the angle clip Bracket: JH12AC, JH21AC, JH32AC
and JH64AC
Secure the angle clip to the rod with 2 - 1/4x20 nuts as shown.
Note: The clip may be secured directly to the ceiling using an appropriate anchor*.
*Consult the manufacturer's instructions and load ratings before using on your application.
**Consult and follow local codes and practices.
***Follow all safety guidelines.