Advertisement
Quick Links
CAUTIONS
• The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
• Turn off the Camera/Monitor if the system is not in use.
• The adapter is used as the disconnect device from the mains. The
adapter shall remain readily operable.
• The Camera/Monitor can only be completely disconnected from the
mains by unplugging the adapter.
• Do not cut the DC power cable of the apparatus to fit with another power
source.
• Attention should be drawn to the environment aspects of the battery
disposal.
• Remove the batteries when cleaning the unit.
• Remove the batteries before storing the unit for a long time.
• When necessary, REPLACE ALL FOUR BATTERIES in this unit with
new ones.
• Use only the size and type of battery with the correct polarity as indi-
cated in the battery compartment.
• Be sure to install the battery with the correct polarity as indicated in the
battery compartment.
• Properly dispose of the battery. Exposure to high temperatures can
cause the battery to explode, so do not dispose of in a fire. Place tape
over the terminals to prevent direct contact with other objects. Some
countries have regulations concerning battery disposal. Please follow all
applicable regulations.
250 Gibbs Road • Islandia, NY 11749
631-582-8440 • 800-879-7575
Email: sales@flexbar.com • www.flexbar.com
USER MANUAL
Flexbar Wireless Inspection Camera
with Color LCD Monitor
MODEL NO. 13290
Please read this user manual carefully before using this
product!
Advertisement
Summary of Contents for flexbar 13290
- Page 1 • The Camera/Monitor can only be completely disconnected from the mains by unplugging the adapter. Flexbar Wireless Inspection Camera • Do not cut the DC power cable of the apparatus to fit with another power with Color LCD Monitor source.
- Page 2 LCD. Adjust the brightness, contrast, orienta- tion, and roll the ON/OFF switch of the camera for better image effect. Thank you for choosing the Flexbar. Please read the User Manual carefully before using this product.
- Page 3 STRUCTURE GENERAL SAFETY INFORMATION WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS! * Prevent object and liquid entry. Never spill liquid of any kind on the video display unit.
- Page 4 INSTALLATION To Install Monitor for Wired Use The product also supports wired use by connecting the monitor Please install the batteries, tube first before using the product. to the camera. Steps of installation as following: To Install Batteries: 1. Using a screwdriver, remove screw and cover. 2.
Need help?
Do you have a question about the 13290 and is the answer not in the manual?
Questions and answers