Moser SPRING RIDE Procedure For Maintenance

PROCEDURE FOR MAINTENANCE OF THE HARNESS LIMIT SWITCHES

To get that all harness limit switches are activated at the third click proceed as follow:
1. Close all the handles except that you need to adjust
2. Close this handle until the third click
3. Check on the operator console if the signal lamp " SAFETY BARS CLOSED " is
power ON
Moser Rides SRL
Manufacturers and sellers of quality Amusement Rides
Via Abetone Brennero – 46035 Ostiglia (Mn) Italy
Tel. ++39 386 800001 Fax ++39 386 802099
Email: moser@moserrides.com
SPRING RIDE
Fig. 1: Safety bars closed signal lamp
Pag. n. 1