Advertisement
To change Abduction and External Rotation:
1. To change Abduction, press the STOP button.
2. Hold STOP button until the screen shows >> pointing to
ABD value.
3. Press (+) to increase and (-) to decrease.
4. To change External Rotation, press the Rotation button.
The arrows will be pointing at the number on the right
hand side.
5. Press (+) to increase and (-) to decrease.
6. Press the START button to record change.
7. Press START again to recalibrate. CPM will go to
midrange and stop.
8. Press START again.
Abduction
Rotation
Distributed by:
PATIENT INSTRUCTIONS
Kinex KS2™ Shoulder CPM
STOP
START
(+)
(-)
ML 0106
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KINEX KS2 Shoulder CPM
Summary of Contents for KINEX KS2 Shoulder CPM
- Page 1 PATIENT INSTRUCTIONS Kinex KS2™ Shoulder CPM To change Abduction and External Rotation: 1. To change Abduction, press the STOP button. 2. Hold STOP button until the screen shows >> pointing to ABD value. 3. Press (+) to increase and (-) to decrease.
- Page 2 PATIENT INSTRUCTIONS Kinex KS2™ Shoulder CPM To change Abduction and External Rotation: 1. Press the STOP button. 2. To change abduction, press the MENU button once; M1 should appear on the screen. 3. Press the upper left Abduction button on hand controller.
Need help?
Do you have a question about the KS2 Shoulder CPM and is the answer not in the manual?
Questions and answers