List Of Midi System Messages Supported By Sound Driver Version 1.27 - Sega SATURN Device Manual Supplement

8. List of MIDI System Messages Supported by Sound Driver
Version 1.27
Supported: $F0 Exclusive
Ignored: $F1 Quarter Frame Message
Ignored: $F2 Song Position Data
Ignored: $F3 Song Select
Ignored: $F4
Ignored: $F5
Ignored: $F6 Tune Request
Supported: $F7 End of Exclusive
Ignored: $F8 Timing Clock
Ignored: $F9
Ignored: $FA Start
Ignored: $FB Continue
Ignored: $FC Stop
Ignored: $FD
Ignored: $FE Active Sensing
Supported: $FF System Reset
* When a system reset [=$FF] MIDI system message or a System Exclusive reset is received,
the sound target program starts up.
System Exclusive Command Table
Command
$00: Data Dump Request
$01: Set Data
$02: Acknowledge
$03: Not Acknowledged
$04: Reset
$05: Tone Bank Data Change
$41: Data Dump
10
(see other table)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
(no plan to support)
Saturn ← External
Saturn ← External
Saturn ←→ External
Saturn ←→ External
Saturn ← External
Saturn ← External
Saturn → External