Transportation; Wintering; Storage; Maintenance - STERWINS 8VGS2-3IN1.1 Assemby - Use - Maintenance Manual

shorter cuttings obtained are better suited for composting.
FR
After use
Switch the product off and let it cool down.
ES
Check, clean and store the product as described below.

5. TRANSPORTATION

PT
Transporting the machine may require that you meet certain requirements specifi c to your country.
Please make sure to respect them by contacting the authorities of your country, in order to respect them
IT
all. Ensure temperature during transportation will never be out of temperature range given on chapter

storage

EL
5.1 TRANSPORT THE MACHINE
Switch the product off and fully charge the battery. Attach the blade sheath. Protect the product from
PL
any heavy impact or strong vibrations which may occur during transportation in vehicles. Secure the
product to prevent it from slipping or falling over.
RU

6. WINTERING

KZ
Follow all instructions given on chapter storage below. We recommend using the original package
for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
UA
7. STORAGE
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to 24°C. Cover it
RO
in order to provide added protection. We recommend using the original package for storage or covering
the product with a suitable cloth or enclosure to protect it against dust. Be sure to secure the unit while
transporting
EN
7.1 STORE THE MACHINE
Illustration 6.1
Shutdown the power tool . Examine the unit thoroughly for worn, loose or damaged parts. Clean the unit
before storing. Do not expose the product to sunlight. Make sure the product is always protected from
cold and humidity.

8. MAINTENANCE

8.1 CLEANING
Illustration 5.1 to 5.3
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment
with a cloth and/or compressed air. It is highly suggested that you clean the device after every use.
Do not use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
grass shear.
DANGER! Risk of injury due to electric shock.
Shutdown the power tool before adjusting, inspecting,
cleaning or storing the product.
262