Transportation; Wintering; Storage - STERWINS 1300WT50 SM5I-3 Assemby - Use - Maintenance Manual

Stop the pump
• To reduce the risk of injury, always stop the machine :
- before cleaning or clearing a blockage
- before installing or removing attachments
- before checking, maintaining or working on the product
- if the machine starts to vibrate abnormally (inspect
immediately).
4.5 SPECIFIC FUNCTIONS
Automatic function
Pressure will go down gradually as water is used. When the pressure falls below the minimum value, the
pump will start automatically.

5. TRANSPORTATION

5.1 TRANSPORT THE MACHINE
CAUTION In order to prevent accidents or injuries,
keep in mind the weight of the appliance during transport
(see Technical Data).
Protect the product from any heavy impact or strong vibrations which may occur during transportation
in vehicles. If you want to transport the appliance on a vehicle secure it from slipping or vibrating.
Secure the product to prevent it from slipping or falling over.

6. WINTERING

Illustration 6.1 to 6.4
Follow all instructions given on chapter storage below.

7. STORAGE

7.1 STORE THE MACHINE
The instructions mentioned in the maintenance section must be carried out before any storage.
Illustration 6.1 to 6.3
• Completely drain the pump, allow it to dry and put back the two connector caps.
•
• Store the unit and its accessories in a frost-free place.
• The unit should always be stored in a clean, dry, ventilated place out of the reach of children. Ideally, the
temperature of the room in which the device is stored should be between 4 and 24°C.
• We recommend that you store the unit in an upright position, in its original package.
illustration 4
209
FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
KZ KZ
UA UA
RO RO
EN EN