OPERATING PROCEDURES
f.
Locate the well beneath the visual display, and lift the well access
cover.
g. Move the PROGRAM LOAD switch forward to load the program from the
tape, and close the access cover.
3-5. NORMAL OPERATION.
After the program has been loaded as a result of step (g) above, instruc-
. tions appear on the display screen. Follow these instructions until the
task is completed; then unload the tapes and turn off the machine as
described in the following paragraphs.
3-6. UNLOADING A TAPE CARTRIDGE.
Unload a tape cartridge as follows:
a.
Open the access cover and,
if tape is not already
rewound into the tape
cartridge~
push the rewind
button.
b. Move
th~
locking lever to
the unlock position.
c.
Lift the loader
3-3