Download Print this page

Sealey SFF16 Instructions page 2

Desk/floor fan 3-speed 16" 230v

Advertisement

DO NOT allow children to operate the fan.
DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.
DO NOT use the fan outdoors.
DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.
When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof
location.
NOTE: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
2. INTRODUCTION
Manufactured from durable composite material, ergonomically designed to pivot on a 180° axis, maximising the volume and direction of air
flow. Can also be wall mounted. Features 3 speed settings, which can ideally be used for intense cooling power or as an air circulator for the
whole room. Fitted with BS fully approved plug.
3. SPECIFICATION
Model No: ............................................... SFF16
Fan ø: ........................................... 400mm(16" )
Speeds: ........................................................... 3
Power: ........................................................ 55W
Supply: ............................................. 230V-50Hz
Height: ....................................................525mm
4. OPERATION
4.1.
The fan can be used either free
standing or wall-mounted (fig.1).
4.2.
Wall Mounting
4.2.1.
Unclip both feet, install 2 x 4mm round
head screws at 266mm centres in the
required position but do not screw
home fully.
4.2.2.
Locate the keyhole slots in the fan
base over the screw heads and slide
the base down.
4.2.3.
Tighten screws down over base,
taking care not to over-tighten.
4.2.4.
The fan head will lock in 10°
increments to allow the most effective
position to be selected.(fig.1).
4.3.
The fan is supplied with a switch providing 'off' and 3 speed settings.(fig.2)
4.4
When the fan is being used free-standing, ensure that the switch is in the 'off' position before
connecting to mains power.
4.5.
Ensure that the flex between the mains plug and the fan is routed so as not to present a trip hazard.
5. MAINTENANCE
IMPORTANT: Turn the fan OFF and disconnect from power supply before cleaning.
5.1.
Use only a soft, damp cloth to clean the fan.
5.2.
DO NOT immmerse the fan in water and NEVER allow water to drip into the motor housing.
5.3.
DO NOT use solvents or other chemicals to clean the fan.
5.4.
To clean the fan blades, remove front guard by removing the 5 screws situated on the reverse side of the fan guard.
5.5.
Wipe the blades and guards clean then reassemble front guard.
5.6.
When not in use, place the fan in its original box or otherwise cover to protect from dust and store in a safe, dry childproof location
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to:
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Ltd
www.sealey.co.uk, email: sales@sealey.co.uk or phone:01284 757500.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Environmental Protection
WEEE Regulations
01284 757500
01284 703534
fig.1
fig.2
www.sealey.co.uk
sales@sealey.co.uk
SFF16
Issue: 1 - 23/02/15

Advertisement

loading