Download Print this page

OPFXS ASTEROIDE User Manual

Sampler & harmonizer

Advertisement

Quick Links

MIX:
sets the master level of sampled signal
FUNDAMENTAL:
sets level of sampled signal at fundamental
LOW OCT:
sets level of sampled signal one octave down
HIGH HARMONICS:
sets level of sampled signal at higher harmonics
nd
2
HARMONIC:
sets level of sampled signal at 2
SINGLE/DUAL:
toggles between SINGLE note and DUAL notes sampling
BYPASS:
bypass the pedal and erases the sampled note
SAMPLE:
samples the note being played
When toggle switch is set to SINGLE only one note per time will be sampled and played. Sampling a new note erases
the previous one.
When set to DUAL, two notes can be sampled at different times and played back at same time.
Example of DUAL sampling:
-
Play note A1 and push SAMPLE
-
A2 is played back
-
Play note C3 and push SAMPLE
-
A2 + C3 are played back at same time as a bichord
-
Play note D3 and push SAMPLE
-
C3 + D3 are played back at same time as a bichord (A2 is erased)
-
Play note E3 and push SAMPLE
-
D3 + E3 are played back at same time as a bichord (C3 is erased)
-
...and so on...
SAMPLE footswitch can be set to operate in two different modes when it's held down long (keep pressed):
-
CONTINUOUS SAMPLING, keeps sampling while playing. In this mode the pedal behaves more like a standard
octaver pedal. When SAMPLE is released the last played note while pushing SAMPLE is sampled.
ASTEROIDE
Sampler & Harmonizer
www.opfxs.com
User Manual
Rev. 11/05/2020
CONTROLS
nd
harmonic
SINGLE/DUAL notes sampling mode
SAMPLE footswitch LONG PRESS

Advertisement

loading

Summary of Contents for OPFXS ASTEROIDE

  • Page 1 ASTEROIDE Sampler & Harmonizer www.opfxs.com User Manual Rev. 11/05/2020 CONTROLS MIX: sets the master level of sampled signal FUNDAMENTAL: sets level of sampled signal at fundamental LOW OCT: sets level of sampled signal one octave down HIGH HARMONICS: sets level of sampled signal at higher harmonics...
  • Page 2 BYPASS. In this mode ORANGE LED is normally ON and only turns OFF when you push SAMPLE footswitch. TRACKING setting Tracking can be set to: Help low tuned guitars to cope better with ASTEROIDE Increase/decrease the tracking range 4 tracking ranges can be set. To set a new tracking: set the pedal in ON mode (RED LED ON).
  • Page 3 Specs: Powering: 9V DC with center negative DC Jack 2.1mm (BOSS™ standard) Current consumption @ 9V DC: 100mA in SPLIT mode Input nominal level: instrument Input Impedance: 1M Ohm Output Impedance: 600 Ohm Bypass: transparent buffered bypass...