Using Bluetooth Playback - LENCO LPJ-300WH Manual

Using Bluetooth Playback

Pairing to Bluetooth Wireless Speakers or Sound Bar
NOTE: Bluetooth is ON by default when the projector first powers ON.
Bluetooth can be turned ON or OFF from the OPTIONS Menu.
Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to
1.
which you wish to connect. Devices such as smartphones, tablets, or
computers are not Bluetooth receivers and will not connect to the projector.
To eliminate confusion, you should disable Bluetooth on all receivers to
which you do not wish to connect.
Power on the projector and make sure the projector's Bluetooth is ON (see
2.
note above). The projector will begin searching for nearby Bluetooth
devices to connect to, and will automatically initiate pairing.
When successfully paired, the Bluetooth receiver should indicate it is
3.
connected, usually with a chime or other audible noise. Check the user
manual on your Bluetooth receiver for more information.
When successfully connected, the projector will display the Bluetooth
4.
receiver's name on the top right portion of the Main Menu screen, and
sound played from the projector will be heard through the Bluetooth
receiver.
After initial pairing, the projector and the Bluetooth speakers will stay paired
unless unpaired manually by the user, or erased due to a reset of either device. If
this occurs or you find either unit is unable to connect, repeat the above steps.
Note: If external devices are connected with a VGA cable,
transmitted (no sound).
The Bluetooth option can't be used in vga mode.
20
only video image is