Advertisement
A djusti n g S t e e r ing and Thrott l e T r i m s
Steering Trim
Adjust the direction wheel to center the tires. Use sub-trim (see your remote control's instruction
manual) if needed. If direction wheel is not close to its desired neutral position,and direction
wheel cannot be centered using sub-trim, please take the following steps:
Multi Function
ST .D/R
POWER
steering trim
1. Make sure transmitter steering wheel and steering trim are set to "0" or neutral.
2. Remove the servo output rocker arm using a 2.0mm hexagon wrench,exchange angle to install
the rocker arm in correct orientation.
3. Trim the steering adjust the steering wheel to the neutral position as described above.
5
Advertisement
