Advertisement
Technical Specifications
Dimensions
W (5.03in) x D(4.33in) x H(1.18in)
Weight
0.33lbs
Power
Input 100 VAC, 50Hz
Input 110 VAC, 60Hz
Input 240 VAC, 50/60Hz
Output 5VDC 1A
Interfaces
DSL Line: RJ11
Ethernet: 1 Port 10/100BaseT, Auto MDI/MDIX
On/Off Power Switch
Ordering Information
1611-A1-200
1611-A1-302
ADSL2+ Single Port Modem
Standards Support
ATM Support
- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back
- Support for 8 PVC's
- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)
Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server/Relay/Client
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)
PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Parental Control
- MAC Filtering
- Stateful Packet Inspection
ADSL2+ CPE Router, 10/100BaseT, N.A.
ADSL2+ CPE Router, 10/100BaseT, EURO
Protocol Support
ANSI T1.413 (Full Rate ADSL)
ITU G.992.1 (DMT)
ITU G.992.2 (G.lite)
ITU G.992.3 (ADSL2)
ITU G.992.5 (ADSL2+)
ITU G.994.1 (G.hs)
Annex L
Annex M
Management
Web-based Configuration GUI
CLI
Telnet Remote Management
FTP/TFTP firmware upgrade and configuration
backup/restore
Syslog Support
Regulatory Compliance
FCC Part 15, Part 68
CE
UL
TUV
RoHS compliant
Operating Requirements
Operating Temperature: 32F to 104F (0C to
40C)
Storage Temperature: -4F to 149F (-20C to 65C)
Humidity: 5% to 95%, non-condensing
17 December 2010 11:28:25
Advertisement
