Citizen 8989 Abbreviated Instruction

English
• To see details of specifications and operations, refer to the instruction manual.
Component identification
Analog
indication 1
Button
M
Mode
Indication
Button
C
Temperature
sensor
• Actual appearance may differ from the illustration.
Using the light
1.
Press the lower left button
The light turns on.
Changing indication of the analog indication 2
1.
Press and release the upper left button
the mode to any one other than [CHR].
2.
Press and release the upper right button
change the indication.
" ▲ " on the digital indication shows the current indication of the
analog indication 2.
▲
SEC The "second" of the time of the mode [TIME]
ALARM The "hour" of the alarm time set
DU. T The "hour" of the dual time
8989 Abbreviated instruction
Analog
indication 2
Button
B
Button
A
Digital
indication
.
C
repeatedly to change
M
repeatedly to
B
Indication
Setting the time
1.
Press and release the upper left button
the mode to [TIME].
2.
Press and hold the upper right button
seconds or more.
The "second" on the digital indication starts blinking and
becomes adjustable.
3.
Press the lower right button
time source.
4.
Press and release the upper right button
change the target to be set.
• Each time you press the button, the target changes as follows:
Second Minute
Analog indication 2 Analog indication 1
5.
Press and release the lower right button
• Pressing and holding the button changes indication continuously when
adjusting "hour" and "minute".
• "A" or "P" is displayed to indicate AM or PM in 12-hour basis indication.
• When setting the analog indication 1, set it to the same time as that of
the digital indication. Pressing and holding the button changes indication
continuously.
• When setting the analog indication 2, set its hand to the 12 o' c lock position.
Pressing and holding the button changes indication continuously. Pressing
button after setting the analog indication 2 finishes time setting.
B
6.
Repeat steps 4 and 5 to set other targets.
7.
Press and release the upper left button
procedure.
repeatedly to change
M
for 2
B
in accordance with a reliable
A
repeatedly to
B
Hour
12/24 hour basis
to adjust the target.
A
to finish the
M