Controls - Akai CR-80-SS Operator's Manual

CONTROLS
Fig. 1
1. POWER SWITCH
2. PROGRAM INDICATOR LAMP
Shows which program is being played.
3. TRACK SELECTOR
For selection of desired tracks.
4. RECORD BUTTON
For recording mode, depress RECORD BUTTON and PLAY BL1TTON simultaneously.
5. PLAY BUTTON
Advances tape for recording/playback mode.
6. FAST FORWARD BUTTON
Advances tape at high speed (fast program selection).
7. STOP BUTTON
8. CONTINUOUS PLAY SWITCH
Depress for continuous playback.
9. 4-CH 2-CH STEREO INDICATOR LAMP
Indicates 4-channel or 2-channel operation.
10. 4-CH 2-CH STEREO SELECTOR
11. PHONE SELECTOR
For selection of front or rear channel listening.
12. PHONE JACK
13. CARTRIDGE RECEPTACLE
14. FRONT CHANNEL (LEFT/RIGHT) VU METERS
Indicates front channel recording/playback levels.
15. RECORDING INDICATOR LAMP
Lights during recording mode.
16. REAR CHANNEL (LEFT/RIGHT) VU METERS
Indicates rear channel recording/playback levels.
17. FRONT CHANNEL (LEFT/RIGHT) VOLUME CONTROLS
Playback: Front channel speaker volume control.
Recording: Front channel recording level control (adjust while observing Front Channel VU Meters).
18. TONE CONTROLS (CR-80-SS only)
Front and Rear channel tone control
19. REAR CHANNEL (LEFT/RIGHT) VOLUME CONTROLS
Playback: Rear Channel speaker volume controls.
Recording: Rear Channel recording level control (adjust while observing Rear Channel VU Meters).
2