Advertisement
Aurora Vision
Aurora Vision (AV) is a virtual reality trainer that introduces basic concepts and
procedures using a DigiTrak Falcon locating system at an HDD jobsite. Please
carefully review and follow the safety warnings on the user screen before
operating Aurora Vision.
What's in the Box?
• Lenovo Legion™ high performing Virtual Reality console with the AV software
preinstalled
• USB keyboard and mouse
• VIVE Cosmos™ headset with cable and cable retractors
• 2 - VIVE controllers with lanyards (4 - AA alkaline included)
Connect the Hardware
1.
Set up the VR console near the intended play area with access to a surge
protected electrical outlet.
2.
Connect a monitor to the VR console with an HDMI cable.
3.
Connect these cables to the Link box:
• Power cable (back)
• DisplayPort cable (back)
• USB 3.0 cable (back)
• Headset cable (front)
4.
Connect the USB and the DisplayPort
cables to the back of the VR console. (The front USB ports are disabled.)
5.
Plug the VR console, monitor, and Link box into an electrical outlet with the
appropriate cables.
6.
Connect the mouse and keyboard into an open USB 3.0 port.
7.
Turn on the monitor and VR console to begin the first-time setup.
Setup requires a monitor and HDMI cable, which are not included.
- 2 -
Advertisement
