Summary of Contents for Arch Environmental Equipment CTS 9000 IRRD
- Page 1 P r i n t C l o s e Wi n d o w BELT PROTECTION UNIT CTS 9000 IRRD INFRA-RED BELT RIP DETECTION UNIT OPERATIONS INSTALLATION MANUAL INFRA-RED RIP DETECTOR...
- Page 2 110VAC Operation: If an object is protruding through the belt as it passes the CTS 9000 IRRD it will break the infrared beam and the unit will trip. If there is a longitudinal rip in the conveyor belt material...
- Page 3 Then reset the CTS 9000 IRRD by pressing the reset button. The DELAY TIME SELECTOR in the control box can set the time that the infrared beam must be broken to trip the unit. When the unit is tripped the lockout led will be illuminated and the trip led will be illuminated every time the infrared beam is broken.
- Page 4 The unit does not require any lubrication. Standard Installation Dimensions: TOP VIEW CONTROL UNIT TRANSMIT UNIT RECEIVE UNIT INFRARED BEAM OBSTRUCTION SIDE VIEW ote: The dimensions shown are standard dimensions and may be modified to meet the requirements of a specific application. pecifications: Supply Voltage: 110/220 VAC...