nekos KATO SYNCRO Instruction Manual
  1. Manuals
  2. Brands
  3. nekos Manuals
  4. Home Automation
  5. KATO SYNCRO
  6. Instruction manual

nekos KATO SYNCRO Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
" DECLARATION OF CONFORMITY "
I, the undersigned, representative of the company nekos s.r.l., declares that the product
defined below complies with the following directives:
89/336/EEC Directive (EMC Directive) and subsequent amendments
and that all the following standards have been applied:
EN 55014-1; EN 61000-2-3; EN 61000-3-3; EN 55014-2.
Last two figures of the year of the CE marking: '04
KATO
chain operated actuator 230V o 24V
Mason Vicentino, 1.03.2004
Giuliano Galliazzo
The President
english
Syncro
instruction manual - Montage und Betriebsanleitung
nekos s.r.l. - italy
36064 mason vicentino (vi) _ via capitoni, 7/5
tel. 0424.411011 _ fax 0424.411013 _ www.nekos.it

Advertisement

Table of Contents
loading

Summary of Contents for nekos KATO SYNCRO

  • Page 1 “ DECLARATION OF CONFORMITY ” I, the undersigned, representative of the company nekos s.r.l., declares that the product defined below complies with the following directives: 89/336/EEC Directive (EMC Directive) and subsequent amendments and that all the following standards have been applied: EN 55014-1;...

  • Page 2: Table Of Contents

    11 with directives” issued by the EU. 8. PROGRAMMING THE LIMIT SWITCHES page 11 nekos holds the technical file with all the documentation to 9. TECHNICAL DATA page 13 show that our products have all been inspected to ensure 10.

  • Page 3: Safety Indications

    2. USE OF KATO SYNCRO ATTENTION: PLEASE READ THE FOLLOWING SAFETY INDICATIONS CAREFULLY BEFORE ATTEMPTING Kato Syncro chain actuator is provided with the new Nekos patented system for the INSTALLATION OF THIS APPLIANCE. THESE INDICATIONS WILL HELP TO AVOID CONTACT WITH coordinated synchronization of chain movement.

  • Page 4: Assembly

    (Fig. 2) or divide the frame in 3 parts in case of All preparatory operations, assembly and electrical con- Kato Syncro mounting. nections must be carried out by technical and specialized B. Select the correct form of brackets (Fig. 3) .
  • Page 5 A. Pencil in an “X” over the centre line of the window frame (Fig. 12) or divide the by checking the pressure on the weather strips. frame in 3 parts in case of Kato Syncro mounting. B. Select the correct form of brackets (Fig. 13) .

  • Page 6: Electrical Connections

    MOTOR IN ELECTRONICAL PROTECTION DUE TO EXCESSIVE CHAR- ON AND FLASHING MOTOR IS IN STRANGE POSITION - MOTOR IS NO LONGER 6.2. Connections of Kato Syncro. PROGRAMMED. Cable supplied together with actuator is 2,5 m (±5%) long and it is calculated in accor- 8.

  • Page 7: Technical Data

    10. CHECKING FOR CORRECT ASSEMBLY Programming for synchronized functioning Two Kato Syncro actuators to run in a synchronized and coordinated way, have to be • Check that the window has closed completely, even at the corners, and check there programmed. Programming consists on determining actuator “MASTER” and the one are no obstacles caused by assembly in the wrong position.

  • Page 8: Emergency Manoeuvres, Maintenance And Cleaning

    11. EMERGENCY MANOEUVRES, MAINTENANCE AND CLEANING warranty. The Manufacturer will not accept responsibility for possible damages caused by erroneous assembly, movement or insertion, use of excessive stress or improper use. Should the window have to be opened manually in the Any repairs carried out under warranty are always intended “Ex-factory producer”.

Table of Contents