This may cause damage to the internal components. WATCH OUR INSTALLATION VIDEO Installation for all Swash products can be found online at brondell.com CHECK BOLT SPREAD This bidet can only be installed on toilets with a bolt hole spread of 5.5 inches (see Product Dimensions on Page 7 for more information).
Page 4
PRODUCT INSTALLATION (cont.) SWASH INSTALLATION (cont.) NOTE: Steps may vary by type of seat and toilet 2. Turn Off Water Supply Valve and Flush Toilet a. Turn water valve off to stop the flow of water. b. Flush toilet and hold down handle to completely empty tank.
Page 5
SWASH INSTALLATION (cont.) 6. Install Mounting Plate for top-mounted toilet seats (see Page 11, Step 5 for instructions on Standard Installation). This method will use a combination of the included Top- Mount Brackets and the original toilet seat mounting bolts. a.
PRODUCT INSTALLATION (cont.) SWASH INSTALLATION (cont.) NOTES: • Make sure to only use a grounded GFCI (ground fault circuit interrupter) electrical outlet. In the case of a short circuit, a grounded GFCI outlet may help prevent electric shock or injury. •...
BRONDELL reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts in connection with warranty repairs for the first three years from date of purchase on all products except those that may be subject to commercial use limitations.
Page 8
Brondell, Inc. PO Box 470085 San Francisco, CA 94147-0085 Phone: 1-888-542-3355 Email: support@brondell.com Web: www.brondell.com For questions, contact Brondell Customer Service: 1-888-542-3355, Monday – Friday, 9am – 5pm PST MANUFACTURED BY: Brondell, Inc. PO Box 470085 San Francisco, CA 94147-0085 Made in Korea Please retain receipt records for any warranty claims.
Need help?
Do you have a question about the Swash IS707 and is the answer not in the manual?
Questions and answers