Adding/Deleting Channels With Manual Program; Tuning Channels; Adjusting The Sound Level - Zenith R40W46 Installation And Operating Manual

Adding/Deleting Channels with Manual Program

1. Press the menu button and then use
Channel menu.
G
2. Press the and then use
3. Press the G and then use
4. Press the G and then use
you want to memorize or erase.
F
5. Press the button and then use
6. Press the G and then use
F
7. Press the button and then use
You can make a channel name.
8. Press the G and then use
D
E
then / button to enter alphabet
blank.
9. Repeat process 3 to 8 to memorize or erase another channels.
10.Press the exit button to return to TV viewing.

Tuning Channels

D
Use the ch / E button to easily select the next higher or lower
channel. Or, use the NUMBER buttons to directly select the desired
channel.

Adjusting the Sound Level

D
Use the vol button to increase the volume level or vol
decrease the volume level.
If you press the mute button on the remote control once, the sound is
reduce to the half level of original volume level. When pressing the
mute button on the remote control again, the sound is muted. At this
time, the word is displayed.
Using Mute is convenient if you need to answer a telephone call.
To restore the muted sound, press the mute button on the remote
D
control again or vol / E
D /
E
D
E
/ button to select
D E
/ button to select
D
/ E button to select the channel number
D
E
/ button to select
D
E
/ button to select
D
E
/ button to select
F G
/ button to select a word position and
to , to , number to and
button again.
button to select the
.
.
.
or .
.
E button to
11
Channel
CH.
{ {
EZ Scan
Manual prog. { { Manual prog. { {
To set
Favorite ch. { {
+ + Move {Next+} } Back
Manual program
Channel Channel { { { { TV02
{ {
Memory
{ {
Fine
Ch.name { {
Booster { {
+ + Move {Next+} } Back
Volume
EEEMute
{ {
5