Off Air Antenna With Vcr - Zenith HEALTHVIEW H20J55DT Installation Manual

Hook Up an Off Air Antenna with VCR
Connect an over-the-air signal source to the VCR and TV
Over-the-Air Antenna with VCR
1 Locate the Antenna/Cable In jack on the
back of the VCR.
Connect the antenna that runs from the wall
2
jack directly to this jack, according to the
connection diagram shown to the right.
3
Make the VCR to TV connections as indicated
in the illustration.
If you have a 75 ohm RF cable, then you
don't need any adapters!
A 300 to 75 ohm adapter is not included
with the Zenith TV.
No A/V cables are
included with the TV.
Page 10
Antenna
VCR Back AV Panel
In
Out
RF Coaxial Wire
(75 ohm)
Typ ica l
TV Bac k
Antenna
Cable
TV SPEAKER
M.P.I.
VIDEO IN SPEAKER OUT
VCR Back
output
switch 3 4
Video Audio
A/V cables
not included
with TV
206-4065