Table of Contents
Advertisement
Quick Links
Manufacturer
630 Komas Drive | Suite 200
Salt Lake City | UT 84108 | USA
P +1 (801) 582-5533 | F +1 (801) 582-1509
www.blackrockmicro.com
CerePlex E
PN: 7513, 10511 – E96
PN: 8010, 10510 – E128
PN: 10747 – E256
Instructions for Use
Revision 4.00 / LB-0545 – CerePlex E IFU – 2020/11
© 2020 Blackrock Microsystems, LLC
Advertisement
Table of Contents
Related Manuals for Blackrock Microsystems CerePlex E Series
Summary of Contents for Blackrock Microsystems CerePlex E Series
- Page 1 P +1 (801) 582-5533 | F +1 (801) 582-1509 www.blackrockmicro.com CerePlex E PN: 7513, 10511 – E96 PN: 8010, 10510 – E128 PN: 10747 – E256 Instructions for Use Revision 4.00 / LB-0545 – CerePlex E IFU – 2020/11 © 2020 Blackrock Microsystems, LLC...
-
Page 2: Table Of Contents
Filament Film Disassembly and Replacement ......13 Disposal ..................14 Magnetic Resonance ............15 Troubleshooting ..............15 Return Merchandise Authorization ........16 Warranty ................17 Support ................17 Complaints ..................17 Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 3: What This Manual Covers
The CerePlex E supports processing and display of biopotential signals from user supplied electrodes. Biopotential signals include but are not limited to: Electrocorticography (ECoG), electroencephalography (EEG), electromyography (EMG), electrocardiography (ECG), electrooculography (EOG) and Evoked Potential (EP). Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 4: Warnings And Precautions
Use only the supplied Blackrock Microsystems components (Cerebus™ system, Digital Hub, CerePlex E HDMI Cable). Substitution of components not supplied by Blackrock Microsystems may affect system performance and patient/subject safety. Do not connect the Cerebus System to an outlet controlled by a wall switch. -
Page 5: Precautions
Avoid overtightening the CerePlex E when attaching to the CerePort Electrode. Device damage may result. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 6: Specifications
10˚ C to 40˚ C, 5 to 95% R.H. (non-condensing) Storage Environment -20˚ C to 50˚ C, 5 to 100% R.H. (non-condensing) Water Ingress Protection Ordinary Equipment, not fluid resistant, IP20 Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 7: Hardware
Figure 1 demonstrates how the CerePlex E96/128 connects with the Digital Cerebus System or the CerePlex Direct in a lower channel configuration. Figure 1–System Diagram of CerePlex E96/128 Connected to the Cerebus System or the CerePlex Direct. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... - Page 8 Figure 2 demonstrates how the CerePlex E 256 connects with a 256-channel Digital Cerebus System or the CerePlex Direct in a 256-channel configuration. Figure 2–System diagram of CerePlex E256 connected to the Cerebus System or the CerePlex Direct. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC...
-
Page 9: Instructions For Assembly
HDMI A-D cable going to HDMI Connector B. Figure 3–HDMI connection to the CerePlex E (E96/128 shown) Power on the connected host device. The LED on the CerePlex E should light up as blue. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... - Page 10 CerePort Electrode and data should be visible in the Central software. The instructions above are also detailed in one of the Blackrock training videos which can be accessed online from the Blackrock Microsystems website under How-to Videos. Revision 4.00 / LB-0545 – CerePlex E IFU...
-
Page 11: Cereplex E Channel Mapping
“Ref” (Reference), will use one of the implanted reference wires (R1 or R2) as input reference. R1 and R2 can be selected by another switch adjacent to reference and ground selector (see below). Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 12: R1 And R2 Reference Selector
256-ch CerePort pedestal that is mated with the CerePlex E 256, selecting R1 or R2 for both switches may result in different references being used for channels 1-128 and 129-256. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 13: Cleaning & Maintenance Instructions
It is recommended to regularly check the condition of the filament film before use and replace it at least once a year or whenever there is a degradation in signal quality. Follow the procedures below to replace the filament film. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 14: Disposal
Disposal The CerePlex E may have incidental contact with bodily fluids. Follow institutional procedures for disposing potentially infectious or biohazardous devices when disposing of the CerePlex E. Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 15: Magnetic Resonance
If you are using and E256 with operating Digital Hubs, make sure the environment Hubs are synced by contacting Blackrock Support Use of unsynced Digital Hubs Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 16: Return Merchandise Authorization
Please address the package as follows: Blackrock Microsystems, LLC ATTN: RMA# 630 S. Komas Dr., Suite 200 Salt Lake City, UT 84108 USA Tel: +1 (801) 582-5533 Revision 4.00 / LB-0545 – CerePlex E IFU © 2020 Blackrock Microsystems, LLC... -
Page 17: Warranty
Warranty Blackrock Microsystems (“Blackrock”) warrants that its products are free from defects in materials and manufacturing for a period of one year from the date of shipment. At its option, Blackrock will repair or replace any product that does not comply with this warranty.
Need help?
Do you have a question about the CerePlex E Series and is the answer not in the manual?
Questions and answers