Advertisement
CA702 Inchair Hammock
1
PLEASE NOTE - THIS SLING SHOULD ONLY
BE APPLIED AND REMOVED ON A FLAT
LYING SURFACE.
Roll the client to one side using a suitable
rolling technique.
3
Roll the client to the other side exposing the
previously tucked in half of the sling.
Pull out the sling and ensure that the sling is flat
and even.
CA702 Inchair Hammock | Lifestyle slings
2
Lie the sling flat with the label facing down on
the bed. The bottom edge of the sling should be
in line with the client's knees and the top should
be in line with the base of the neck. Tuck the
half which is nearest to the client underneath
them. The bottom edge of the sling should be
set 2 inches below the knee as a starting point
4
Roll the client on to their back and ensure the
sling is aligned and centred. Before attaching
the sling to the hoist it is advisable to bring the
lying surface in to a seated position if possible.
Advertisement
