Zanussi ZWD 14581 S User Manual page 25

Care and cleaning
• pull out the emergency emptying cap from the
filter cover, using a pliers.
• when no more water comes out, unscrew the
pump cover, using a pliers, and remove the
filter. Always keep a rag nearby to dry up
spillage of water when removing the cover.
• Remove any objects from the pump impeller
by rotating it.
• replace the emergency emptying cap into the
filter cover and fix it firmly.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged.
It is therefore a good idea to clean it from time
to time.
• Close the pump
door.
Turn off the water tap.
Unscrew the water
inlet hose. Clean the
filter using a hard
bristle brush. Tighten
up the inlet hose.
25