Care And Maintenance - HTC RE Camera Quick Start Manual

CARE AND MAINTENANCE

Always clean your RE after
underwater use. Some water,
especially salt water, is corrosive to
electronics and can result in damage
to your RE.
It is recommended to clean your RE
within 60 minutes of underwater use.
1. Immerse your RE in fresh water,
with its microSD card slot cover
tightly sealed.
2. Leave your RE submerged in a
basin for about 10 minutes.
3. Shake off the water caught in the
USB port.
4. Wipe off water droplets with a soft
cloth and dry your RE in a well-
ventilated place.
• RE can be used underwater only in water temperatures ranging from 15°C to
35°C (59°F to 95°F).
• In case the USB port has had contact with salt water or liquid chemicals,
rinse using fresh water. These contaminants may damage the connector
pins.
• If the USB port gets wet, hold RE with the USB port facing up and shake off
the water. Make sure to let the USB port dry completely before using the port.
Spring or
AVOID:
hot water
More information:
• Never immerse RE in hot springs,
or any liquid besides water (such
as alcohol, liquid soap, detergent,
drinks, etc.).
• Avoid immersing RE or letting the
USB port come into contact with
liquid chemicals such as liquid
soap or detergent.
• Keep RE away from sand.
• Do not jump into water with RE or
subject it to high water pressure
conditions such as rapids or
waterfalls.
Soap, detergent,
gels, etc.
• Subjecting RE to excessive shock,
vibration or pressure by dropping
or hitting it, may affect waterproof
performance.
• Do not charge RE underwater.
• Do not insert a wet storage card
in RE.
• Do not open the microSD card slot
cover underwater or in areas exposed
to water spray, high winds, dust,
or sand.
• RE does not float in water. Do not
drop RE into water.
Dust or
sand