Do you have a question about the AVW-DS55V7 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Avenview AVW-DS55V7
Page 1
VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES Control Your Video PRODUCT MANUAL Model: AVW-DS55V7 Model: AVW-DS55V7 55” LCD Digital Display...
OSD NETWORK SETTINGS - 3G SETTING........24 3.3.5 OSD NETWORK SETTINGS - LOCAL ID & MAC ADDRESS.......25 OSD DATE AND TIME...........25 POWER ON & OFF............27 STRATEGY TIME............29 3.6.1 STRATEGY TIME - VOLUME TIME.........29 3.6.2 PORT TIME............30 FILE MANAGEMENT.............31 www.avenview.com Rev.00 03/2018...
Page 4
TABLE OF CONTENTS SYSTEM UPGRADE..............31 SPECIFICATIONS..............33 WARRANTY CARD..............34 www.avenview.com Rev.00 03/2018...
The AVW-DS55V7, Digital Signage Touch Kiosk has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AVW-DS55V7 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Avenview is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
INTRODUCTION The Avenview AVW-DS55V7 Digital Signage 55”Touch Kiosk allows the user to easily display or upload digital content with an all in one portable solution (LCD display Touch screen and digital signage player bundled together).This unit supports 1080p@60Hz high definition video, multi-channel digital audio, along with support from external sources using HDMI or VGA for quick display of any media content.
PACKAGE CONTENTS Before you start the installation of the AVW-DS55V7, please ensure that the packaging has the listed items below. ITEM 55” Digital Signage Touch Kiosk Power cord C13 Either Standard US power cord* or International power cord (UK,EU,AUS) *Based on order request...
TF Port: Connect TF memory card for memory expansion if the internal memory is full SIM Port: Connect SIM card to connect to 3G network for internet transfer of media files via mobile network connection (Only available for 3G mode and pre-ordered models) www.avenview.com Rev.00 03/2018 Page 8 of 35...
NOTE: To return to the USER setup menu when a playlist is currently active the user must press STOP on the IR Remote control. This will immedialtely stop the content played and display the Digital signage home page. To begin the loaded media, please press PLAY. www.avenview.com Rev.00 03/2018 Page 9 of 35...
Date&Time: This will show the current time and date which was set. Local Storage: This will display system information such as storage capacity, software, screen and Android versions. Network Status: This will display server & LAN network status www.avenview.com Rev.00 03/2018 Page 10 of 35...
*Please note that the user can only call System Setting menu from the home screen and the playlist must be stopped by pressing STOP button on the remote control. 3.1.1 OSD SYSTEM SETTING - DISPLAY LANGUAGE This menu allows you to choose the language of the OSD menu. www.avenview.com Rev.00 03/2018 Page 11 of 35...
Adjust and rotate the screen display. Orientation of the screen should correlate with how the screen has been installed and mounted. 3.1.3 OSD SYSTEM SETTING - SWITCH SCREEN DPI Set the screen resoultion. www.avenview.com Rev.00 03/2018 Page 12 of 35...
LeftDown / RightDown - Display the clock in the top left or right corner of the screen. Close - Turn off the clock. 3.1.5 OSD SYSTEM SETTING - PLAY LOG Turn this feature on to keep a log of the playbacks. www.avenview.com Rev.00 03/2018 Page 13 of 35...
Turn ON or OFF the scroll text feature. If it is set to OFF , the text will not appear on the screen even if it was included in the playlist. If set to ON, the text will appear on screen if it was included in the playlist. www.avenview.com Rev.00 03/2018...
3.1.8 OSD SYSTEM SETTING - SYNC SETTING The Sync feature will allow multiple AVW-DS55V7 LCD units to playback content synchronously. Click Sync Setting to enable or disable this feature. Sync Setting - Set the role of this unit during synchronization.
OSD SYSTEM CONTROL - WORK MODE The unit’s Work Mode can be changed from SINGLE, LAN, WIFI, or 3G modes. *Please note that the OSD menu will change as different work modes are selected. www.avenview.com Rev.00 03/2018 Page 16 of 35...
NO ENCRYPT: Only content packages without encryption password, which were created by EzPoster can be played. 3G: This mode should be selected if the unit is being connected to a 3G mobile network. All network related menus are available. www.avenview.com Rev.00 03/2018...
GTV: Use CDMS as the content management software to create and publish playlists as well as control the unit through the internet. EzPoster/ADPE: Use EzPoster or ADPE as the content management software to create and publish playlists through a USB disk or the internet. www.avenview.com Rev.00 03/2018 Page 18 of 35...
SINGLE (stand-alone) Mode: In this mode, the unit can play content from the built-in memory, external SD card or USB disk. If USB option is selected, only the content stored in that USB disk will be played. www.avenview.com Rev.00 03/2018...
When the unit is set to work in Open play mode, users may setup the playback duration for each image to be played. This is not applicable in other play modes. 3.3.1 OSD NETWORK SETTING - SERVER CONFIGURATION This menu allows users to choose how the unit communicates with the server and configure the network connection. www.avenview.com Rev.00 03/2018 Page 20 of 35...
Page 22
Server connection mode: The unit can find the server by IP address or domain name. For IP mode, enter the server IP address and port. For Domain Name mode, enter the domain name and port. www.avenview.com Rev.00 03/2018 Page 21 of 35...
Page 23
Enable the remote file server then set the server connection mode and enter its IP address and port. If the content management software is set to EzPoster, NET_ID is required for the server connection. www.avenview.com Rev.00 03/2018 Page 22 of 35...
This menu will allow the unit to be set to DHCP mode or static IP mode. Please note this option is only available when the unit is set to LAN mode. DHCP: IP address will be assigned from the LAN DHCP server. Manual: IP address will be set manually by the user. www.avenview.com Rev.00 03/2018 Page 23 of 35...
3.3.4 OSD NETWORK SETTINGS - 3G SETTING When the unit is set to 3G mode, the 3G Setting menu will be available for the user to enable or disable the 3G connection. www.avenview.com Rev.00 03/2018 Page 24 of 35...
Navigate to the Date And Time section to change the unit’s system date and time. The options Start Sync time Setting and Sync Time Now will not be available when the unit is in SINGLE (stand-alone) mode. www.avenview.com Rev.00 03/2018...
Page 27
Sync Time Now: Press this button to synchronize the unit’s local time with the online management platform connected to the network immediately. Note - Select the time zone before doing this function. Otherwise, the time maybe incorrect afterwards. Date Time StartUp Sync Time Setting Time Zone Sync Time Now www.avenview.com Rev.00 03/2018 Page 26 of 35...
1. If set to week mode, select the day you wish to configure on the top scroll bar. For example; if user wants to specify the on / off times for Sunday, choose the Sunday bar. Note - Skip this step if set to uniform mode. 2. Select the Control Mode to choose the preferred control method. www.avenview.com Rev.00 03/2018 Page 27 of 35...
Page 29
3. If Timer control mode is selected, the user will be able to define the on / off times for the 5 timers. Enable the timer before setting the on / off times, only the enabled timers will be in effect. www.avenview.com Rev.00 03/2018...
Volume time will allow the user to define the playback volume at specified times. When this feature is disabled, the user may adjust the volume via the remote control. If it is enabled, the user must set the playback volume within the 5 timers as below. www.avenview.com Rev.00 03/2018...
3.6.2 PORT TIME This feature will allow the unit to switch between different sources and display them in specified times. www.avenview.com Rev.00 03/2018 Page 30 of 35...
3. Once the USB disk is detected, the device will check the files inside the USB disk. 4. During the file check, the upgrade file version will be compared with the current version and a message will be prompted displaying the results to continue with the upgrade or not. www.avenview.com Rev.00 03/2018 Page 31 of 35...
Page 33
8. The upgrade will be take around 90 seconds and once it is complete, the home page will appear. Note - Avoid power outages during the upgrade. Otherwise, the system may get corrupt and fail to upgrade. www.avenview.com Rev.00 03/2018...
Page 34
Video: MPEG1/2/4, H.264, WMV, MKV, TS, flv. Picture: JPG, JPEG, BMP , PNG, GIF. Audio: MP3 Viewing Angle 178° Scrolling Text Supported by EzPoster and CDMS software Accessories Remote control, AC Power Cord www.avenview.com Rev.00 03/2018 Page 33 of 35...
Page 36
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the AVW-DS55V7 and is the answer not in the manual?
Questions and answers