Page 1
KNX B4-UP Button Interface Technical specifications and installation instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D – 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0 info@elsner-elektronik.de Germany +49 (0) 70 56 / 93 97-20 www.elsner-elektronik.de...
Page 2
The product has been tested for the above mentioned standards by an accredited EMC laboratory. Installation and Commissioning 2.1. Installation notes Installation, testing, operational start-up and troubleshooting should only be performed by an electrician. KNX B4-UP button interface • Status: 04.06.13 • Technical Changes and Errors excepted.
Page 3
Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions. 2.2. Installation location The device must only be installed and operated in dry, indoor spaces. Avoid condensation. KNX B4-UP button interface • Status: 04.06.13 • Technical Changes and Errors excepted.