Download Print this page
P+L Systems FTC30 Quick Start Manual

P+L Systems FTC30 Quick Start Manual

Flytrap commercial glueboard insect control

Advertisement

Quick Links

Commercial Glueboard Insect Control
Please read these instructions carefully and store in a safe
place for future reference.
FLYTRAP COMMERCIAL
TM
As part of the P+L brand of insect control products, Flytrap
Commercial
is an effective and versatile commercial flykiller
TM
which utilises highly effective UV tubes and is designed for use
with a high specification glupac™ glueboard. Three sizes of
unit are available and Flytrap Commercial
suspended, discreet or slimline wall mounted.
Contents of package
- 1 x Flytrap Commercial flykiller
- 1 x glupac™ pheromone impregnated glueboard
- 4 x Screws and wall plugs
- 2 x Suspension keyrings
- 2 x Slimline mounting wall brackets
- 2 x Discreet mounting wall brackets
- 1 x Mains cable
- 2 x High powered UV tubes (Fitted)
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
Flytrap Commercial
utilises high powered ultra violet tubes
TM
to attract flying insects and retains the caught insects on a
pheromone impregnated glueboard for inspection or
hygienic disposal.
POSITIONING
THIS UNIT IS FOR INDOOR USE ONLY.
Flytrap Commercial
should ideally be fixed around two
TM
meters above the ground, preferably in the darkest place
within the area to be protected and is supplied with a two
meter mains lead. Do not position the unit close to windows,
skylights or other sources of light, or where it may be
obscured by furniture, doors or other obstacles. Ideally,
Flytrap Commercial
units should be visible from every part of
TM
the area to be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
Flytrap Commercial
can be mounted in three different ways
TM
as shown in the mounting options section of this document.
Once installed in position, fit the glupac™ glueboard in
position as described in the glueboard replacement section
of this document. Use the removable mains lead and plug to
connect the Flytrap Commercial
supply.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING FLYTRAP COMMERCIAL
Flytrap Commercial
should ideally be in operation for 24
TM
hours a day, ensuring your premises are kept free of flying
insects. Insects are most attracted to Flytrap Commercial
unit at night when there is no competition from daylight or
other light sources.
can be ceiling
TM
to an appropriate power
TM
TM
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
GUARANTEE
Flytrap Commercial
maintained as recommended in these instructions should
continue to work for many years.* Use of non-approved
consumables may invalidate the guarantee. Ensure genuine
glupac™ glueboards are used in conjunction with this
product.
*Excludes tubes, glueboards and starters. Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
MOUNTING FIXING CENTRES
METHOD
FTC30
Slimline
305mm 458mm 458mm
Discreet
305mm 458mm 458mm
Suspended
506mm 668mm 668mm
Slimline Wall
Discreet Wall
Suspended
(Chain not supplied)
TM
has a three year guarantee and if
TM
FTC40
FTC80
FTC30, 40 & 80

Advertisement

loading

Summary of Contents for P+L Systems FTC30

  • Page 1 (Chain not supplied) insects. Insects are most attracted to Flytrap Commercial unit at night when there is no competition from daylight or other light sources. FTC30, 40 & 80...
  • Page 2 4. Slowly slide the new glupac™ glueboard into position with the adhesive side facing the tubes. Always ensure the selected genuine glupac™ glueboards are compatible with your unit, available from your PCO or P+L Systems Ltd. TUBE REPLACEMENT BEFORE REPLACING THE TUBES, ALWAYS ENSURE THAT THE UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.

This manual is also suitable for:

Ftc40Ftc80