Connecting To Logtag Online; Starting The Logger; Download / Results; Additional Information - LogTag Recorders UTRED30-WiFi Quick Start Manual

2. CONNECTING TO LOGTAG ONLINE

Before you start your Logger, you need to register it to an account
at www.logtagonline.com. Please ensure you have closed LogTag
Analyzer and proceed to LogTag Online and either create a new
account or sign in with an existing account.
Once you are signed into LogTag Online please click "Register Device".
Here you can register your UTRED30-WiFi. Enter a description and the
Logger's serial number (the number after S/N).
After you have registered your device, you can now click on "Locations"
and create a new Location.
A location represents the static site you wish to monitor such as a
refrigerator or freezer. If you require additional information on creating a
Location, please refer to the LogTag Online User Guide.

3. STARTING THE LOGGER

Ensure your Logger is always connected via the USB cable to a power
source and connect an external probe to the Logger.
If the Logger has been configured with a
Date/Time start, it will start automatically at the
configured time. For the push-button start, when
the display shows 'READY', press and hold the
'START/CLEAR/STOP' button.
Continue to hold while 'STARTING' is shown.
Release the button when
'STARTING' will also disappear, and the
symbol will be shown. The UTRED30-WiFi will now
record temperature data.
If the Logger has been configured with a start
delay, the word 'STARTING DELAY'
instead of the 'REC'
shown in hours and minutes. It will start recording
when it reaches 0:00
Paused function:
If enabled, any button activity will suspend recording and the Logger
will display 'PAUSED'. This allows the user to review the statistics or
clear an alarm without causing an invalid recording, alarm or statistic.

4. DOWNLOAD / RESULTS

1. Open LogTag Online
2. Go to your location, click on "Inspect" to see your readings since you
have configured your Logger.
3. You can download your data by clicking on the download button next
to the month and all your data will be displayed in a temperature
log (PDF).
You can also access your Logger's data via LogTag Analyzer.

5. ADDITIONAL INFORMATION

Stopping the Logger
If enabled, you can stop the Logger; press and hold the
CLEAR/STOP' button. Continue to hold while 'STOPPED' is shown on
the display; release the button when the
The Logger will no longer take any readings, however you can still
review the day statistics and download the logged results to a PC with
LogTag Analyzer.
The option to stop the Logger can be disabled during configuration, see
advanced options in LogTag Analyzer.
disappears.
'READY'
is shown
symbol. The delay time is
'REC'
'START/
'REC' symbol disappears.