Summary of Contents for Genicom GENUV MG-07.1
- Page 1 Manual Radiometer 7.1 GUVX-T1XGS7.1-L GUVX-T1XGS7.1-LA9 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 2 Contents 1. MG-07.1 [GUVX-T1XGS7.1-L] Manual _ English ·························Page 2 ~ 11 3. MG-07.1 [GUVX-T1XGS7.1-LA9] Manual _ English ·····················Page 12 ~ 21 Page 1 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 3 MG-07.1 [GUVX-T1XGS7.1-L] Manual Page 2 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
-
Page 4: Table Of Contents
5-3. Power ON or OFF 5-4. Function button 5-5. Reset cumulative light intensity(Dose) or maximum light intensity(Max. power) 5-6. Measuring the light power 5-7. Notify when to replace the battery Request for A/S in Case of Abnormality Page 3 Genicom Co., Ltd. 2018-rev.1-SA.HAN... -
Page 5: Product Features And Specifications
±10 % (NIST Traceable) Accuracy 73 x 139 x 31 ㎜ Indicator size weight Indicator : 100 g (Without battery) Power DC 9V Battery of detection power : 10W/ ㎠ ) * Customization is available ( Maximum Page 4 Genicom Co., Ltd. 2018-rev.1-SA.HAN... -
Page 6: Relative Response Curve
Do not subject the meter to extremes in temperature, humidity, shock or dust. When the surface contamination of the product, wipe with a soft, clean cloth. Keep sensor free of oil, dirt, etc. Do not disassemble or modifications. Page 5 Genicom Co., Ltd. 2018-rev.1-SA.HAN... - Page 7 Turns the power on/off. ⑤ Function Button Switches the display of Absolute power [mW/cm ], Dose [J/cm ] , and Max. Power [mW/cm You can perform either Dose [J/cm ] or Max. Power [mW/cm Page 6 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 8 ① Product Information Sticker Type : UV Index Meter Detection Range : XXX-XXX nm Power Range : 0~100.0 mW/㎠ NIST Traceable Made in KOREA by Genicom Co., Ltd. www.geni-uv.com ② Battery Cover S7.1-001 ③ Inside of Battery Cover [UV Radiometer 7.1 back side] ①...
-
Page 9: Product Operation Method
Remove the battery cover on the back of the main unit and check if the 9V battery is included. 5-2) Precautions for battery replacement Pulling the connector forcibly can cause it to break. Please hold the battery connector and detach the battery. Page 8 Genicom Co., Ltd. 2018-rev.1-SA.HAN... - Page 10 5-5) Reset cumulative light intensity(Dose) or maximum light intensity(Max. Power) Select the function that you want. And push the function button for 3 seconds. Or turn the power off and on. Push the function button for 3 seconds Page 9 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 11 If the [batt] message is displayed on the LCD or if the screen is blurred, replace the battery. ※ If there is no data input value for more than 90 seconds, the power is automatically turned off. Page 10 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 12 However, failure which is caused by user’s misuse or carelessness within warrant period or any failure after the warrant period shall be chargeable for it’s A/S. - Product inquiry and on-line customer service Tel : +82-42-862-3982, Fax : +82-42-862-2982 E-mail : uvsensor@geni-uv.com Website : http://www.geni-uv.com Page 11 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 13 MG-07.1 [GUVX-T1XGS7.1-LA9] Manual Page 12 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
-
Page 14: Battery Check
5-4. Power ON or OFF 5-5. Function button 5-6. Reset cumulative light intensity(Dose) or maximum light intensity(Max. power) 5-7. Measuring the light power 5-8. Notify when to replace the battery Request for A/S in Case of Abnormality Page 13 Genicom Co., Ltd. 2018-rev.1-SA.HAN... -
Page 15: Product Features And Specifications
Sensor Ø 35, 25.5 h probe size weight Indicator : 100 g (Without battery), Sensor probe : 80g Power DC 9V Battery * Customization is available (Maximum of detection power : 10W/ ㎠ ) Page 14 Genicom Co., Ltd. 2018-rev.1-SA.HAN... -
Page 16: Relative Response Curve
Do not subject the meter to extremes in temperature, humidity, shock or dust. When the surface contamination of the product, wipe with a soft, clean cloth. Keep sensor free of oil, dirt, etc. Do not disassemble or modifications. Page 15 Genicom Co., Ltd. 2018-rev.1-SA.HAN... - Page 17 Switches the display of Absolute power [mW/cm ], Dose [J/cm ] , and Max. Power [mW/cm You can perform either Dose [J/cm ] or Max. Power [mW/cm ⑥ Sensor Probe Connector ⑦ Light- receiving Unit Page 16 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
-
Page 18: Back Side
Type : UV Index Meter Detection Range : XXX-XXX nm ① Product Information Sticker Power Range : 0~100.0 mW/㎠ NIST Traceable Made in KOREA by Genicom Co., Ltd. www.geni-uv.com ② Battery Cover S7.1-001 ③ Inside of Battery Cover [UV Radiometer 7.1 back side] ①... -
Page 19: Product Operation Method
Remove the battery cover on the back of the main unit and check if the 9V battery is included. 5-2) Precautions for battery replacement Pulling the connector forcibly can cause it to break. Please hold the battery connector and detach the battery. Page 18 Genicom Co., Ltd. 2018-rev.1-SA.HAN... -
Page 20: Sensor Probe Connection
(Power OFF) 5-5) Function button If push the function button, the function display will change in order. (ex. Absolute power -> Dose -> Max. power -> Absolute power ...) Max. power Absolute power Dose Page 19 Genicom Co., Ltd. 2018-rev.1-SA.HAN... - Page 21 If the [batt] message is displayed on the LCD or if the screen is blurred, replace the battery. ※ If there is no data input value for more than 90 seconds, the power is automatically turned off. Page 20 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
-
Page 22: Faq
However, failure which is caused by user’s misuse or carelessness within warrant period or any failure after the warrant period shall be chargeable for it’s A/S. - Product inquiry and on-line customer service Tel : +82-42-862-3982, Fax : +82-42-862-2982 E-mail : uvsensor@geni-uv.com Website : http://www.geni-uv.com Page 21 Genicom Co., Ltd. 2018-rev.1-SA.HAN... - Page 23 MEMO Genicom Co., Ltd. 2018-rev.1-SA.HAN...
- Page 24 Genicom Co., Ltd. 2018-rev.1-SA.HAN...
Need help?
Do you have a question about the GENUV MG-07.1 and is the answer not in the manual?
Questions and answers