Greenheck Vektor-H Installation, Operation And Maintenance Manual page 14

Field Coating Touch-Up for Scratched Areas
Standard coating and color is LabCoat™ RAL 7023 Concrete Grey.
Failure to perform touch-ups may result in rust or corrosion which can accelerate color fade. This not covered under
warranty.
TOUCH-UP PAINT REPAIR KIT CONTENTS
• One Zinc Clad Aerosol Can
• One pint (recoat epoxy primer grey) with
one pint (recoat epoxy primer catalyst)
• One quart H.S. Polyurethane
• One Scotch-Brite scratch pad
• Two 1-1/2 inch wide paint brushes
• Four pint-sized empty cans for mixing
• One quart-sized empty can for mixing
• Zinc repair instructions
• MSDS sheets
NOTE
While the manufacturer provides heavy-duty, quality
products for marine environments, routine paint
touch-ups may be required in coastal regions where
salt or marine air could damage the coating. The
severe environment will accelerate the damage from
any scratches or chips and it is recommended that
those be repaired immediately.
To order a coating repair kit, please reference part number HAZ2597 PNT FIELD REPAIR KIT, RAL7023 CONCRETE
GREY. Please contact factory with your fan's serial number for colors other than our standard.
14 Laboratory Exhaust System
®