Table of Contents
Advertisement
Press the CD FWD Skip Button (#16) or CD REV Skip Button (#10) to select the song to
2.
be programmed.
Press the PROG. Button (#11) again to store selection. The CD Track Display (#13) will
3.
advance to "P02".
Press the CD FWD Skip Button (#16) or CD REV Skip Button (#10) to select the next
4.
song to be programmed and press the PROG. Button (#11) to store selection.
You may repeat steps 2 and 3 to program as many as 20 tracks. If you attempt to
5.
program more than 20 tracks, the CD Track Display (#13) will revert to "01" and the old
entry will be overwritten by the current new entry.
Press the CD STOP Button (#12) to end programming and return to normal play mode.
6.
To check the programmed tracks, press PROG Button (#11) continuous to show all the
7.
programmed songs. The CD Track Display (#13) will display the program number first
and then followed by the flashing track number.
Press CD PLAY Button (#14) to begin programmed schedule. The first track in the
8.
program will appear in the CD Track Display (#13) and the PROG Indicator will stay
solid.
To cancel the programmed schedule, press the CD STOP Button (#12).
9.
As long as the unit remains powered on and the CD Door (#2) is not opened, you can
10.
resume programmed play any time by pressing the PROG. Button (#11) and then the
CD PLAY Button (#14) while stopped.
AUX IN (Audio in) FUNCTION – Connecting the device with an external audio
device
This device has an audio input function. Please connect the source with an audio cable
(not included ) to the AUX IN jack. The mode will jump to AUX IN automatically.
RADIO RECEPTION
Set the Function Selector (#7) to the "RADIO" position.
1.
Set the Band Selector (#18) to either "AM", "FM" or "FM Stereo" for the desired radio
2.
band.
Adjust the Tuning Knob (#17) to obtain the desired radio station.
3.
Adjust the Volume Control (#8) to obtain the desired sound level.
4.
You may need to adjust the telescopic antenna (#3) for better reception.
5.
When you wish to turn off the Radio, set the Function Selector (#7) to the "OFF"
6.
position.
TIPS FOR GOOD RADIO RECEPTION
To insure maximum FM tuner sensitivity, the Telescopic Antenna (#3) should be fully
1.
extended and rotated / adjusted to obtain the best possible reception. The FM Stereo
Indicator (#4) will stay solid when a stereo FM station is being received.
When tuning in AM reception, be sure to place the telescopic antenna in a vertical
2.
position. To insure the maximum AM sensitivity, try repositioning the unit until the best
reception is obtained.
CARE AND MAINTENANCE
Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be
1.
used.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
2.
Keep your unit away from heating appliances and sources of electrical noise such as
3.
fluorescent lamps or motors.
If interruptions occur in the music during CD play, or if the CD fails to play at all, its
4.
9
Advertisement
Table of Contents
