Summary of Contents for Abram's Nation The Safety Sleeper
Page 1
Patent: US 7,971,596 B2 The Safety Sleeper® is manufactured in the United States and distributed glob- ally by Abram’s Nation, LLC. The Safety Sleeper® was designed with the inten- tion of addressing certain sleep wandering and security complications associ- ated with various disabilities, including, but not limited to Angelman Syn- drome, Autism and Smith-Magenis Syndrome.
Table of Contents TECHNICAL SPECIFICATIONS ………………………………………………………………... 04 DURABILITY …………………………………………………………………………………………. 05 ASSEMBLE FRAME BASE ………………………………………………………………………. 06 ASSEMBLE TOP FRAME ………………………………………………………………………… 07 ATTACHING ENCLOSURE TO FRAME …………………………………………………….. 08 INSERTING THE MATTRESS (TWIN) ………………………………………………………. 09 ADDING AND REMOVING THE COVERLET .…………………………………………… 10 WASHING & HANDLING INSTRUCTIONS .……………………………………………… 11 SUITCASE PACKING INSTRUCTIONS ………………………………………………………...
Page 3
DO NOT use the The Safety Sleeper® if any parts are missing or broken. Contact or write Abram’s Nation for replacement parts and instructional literature if needed. DO NOT substi- tute parts.
TECHNICAL SPECIFICATIONS Operating Conditions: The Safety Sleeper® is designed for normal indoor conditions. Storage Conditions: The Safety Sleeper® should be stored in the provided suitcase (30x18x12”) in ambient warehouse temperatures (15° to 25°C, or 59° to 77°F) at normal hu- midity levels.
Durability: The Safety Sleeper® is made of high quality, medical grade fabrics and aluminum and has an expected product life of at least 5 years. Materials Fabric & Mesh:100% Polyester Material Flame Resistant Bias Binding: 50% Cotton/50% Polyester Webbing: 100% Polypropylene...
ASSEMBLE FRAME BASE Assembly video also available at https://www.abramsnation.com/informational-downloads/assembly-disassembly/ STEP 1: Lay all six pieces labeled B1, B2, B3, B4, B5, B6 on the ground with labels facing up. STEP 2: Connect B1 to B1, B2 to B2, and B3 to B3 in numerical order by pushing in button & sliding together until button clicks into place.
ASSEMBLE TOP FRAME STEP 1: Lay out four top frame pieces labeled T1, T2, T3, then connect by pushing in button & sliding together until button clicks into place. STEP 2: Repeat for second top support using pieces with T4, T5, T6. STEP 3: Hold the T1-T3 vertically and line it up with the B2-B3 base piece making sure support pieces are facing towards the center of the frame and match the correct jaw slide (S1 to S1, S2...
ATTACHING ENCLOSURE TO FRAME STEP 1: Although the bed may be used directly on the floor, for added stability we recommend placing it on a bed frame (with or without a box spring) and using the provided stabilization straps to secure The Safety Sleeper frame to the bed frame.
(not provided). We provide an air mattress and suitcase for use when traveling. HOME In the home, The Safety Sleeper® is intended for use with a standard mattress (not included) that is within the height parameters below. US Twin: Regular 8-10” tall twin mattress Australian &...
ADDING AND REMOVING THE COVERLET The Safety Sleeper utilizes a coverlet design that creates a completely enclosed pocket for the mattress. The coverlet can easily be swapped out and washed (for more, see the “Washing and Care Instructions”). WARNING: A Coverlet must be used at all times to avoid risk of entrapment between the mattress and the enclosure.
WASHING & HANDLING INSTRUCTIONS WASH BEFORE FIRST USE Materials Fabric & Mesh:100% Polyester Material Flame Resistant. Bias Binding 50% Cotton/50% Polyester. Webbing: 100% Polypropylene. Washing Instructions DO NOT IRON DO NOT USE FABRIC SOFTENER DO NOT DRY CLEAN DO NOT USE BLEACH Machine wash on delicate cycle in either a front loading washing machine or a top-loading machine without a center agitator.
SUITCASE PACKING INSTRUCTIONS The Safety Sleeper® is designed to also travel and comes with a suitcase and air mattress. Below is our recommended method for packing the suitcase. 1. Lay triangular frame pads on left side. 2. Carefully place folded enclosure over the frame pads.
SUITCASE PACKING INSTRUCTIONS The provided air mattress is intended only for use within a secured coverlet and a fully zipped mattress pocket zipper. The following safety tips are provided by the air mattress’s manufacturer. Air Mattress Safety Tips Always keep your airbed fully inflated when in use. Never use an airbed in water.
Regulations and Testing Compliance The Safety Sleeper® uses medical grade flame retardant fabrics and is subject to and compliant with the following regulations. FDA Registered Medical Device Operator: 10048434 Registration: 3011389091 Listing: D234571 CE Marked ...
Page 16
Unique Solutions for Special Families Unique Solutions for Special Families 4726 Highpoint Drive 4726 Highpoint Drive Gibsonia, PA 15044 USA Gibsonia, PA 15044 USA abramsnation.com abramsnation.com...
Page 17
Patent: US 7,971,596 B2 The Safety Sleeper® is manufactured in the United States and distributed glob- ally by Abram’s Nation, LLC. The Safety Sleeper® was designed with the inten- tion of addressing certain sleep wandering and security complications associ- ated with various disabilities, including, but not limited to Angelman Syn- drome, Autism and Smith-Magenis Syndrome.
Page 18
Table of Contents TECHNICAL SPECIFICATIONS ………………………………………………………………... 04 DURABILITY …………………………………………………………………………………………. 05 ASSEMBLE FRAME BASE ………………………………………………………………………. 06 ASSEMBLE TOP FRAME ………………………………………………………………………… 07 ASSEMBLING FRAME PADDING ……………………………………………………………. 08 ATTACHING ENCLOSURE TO FRAME …………………………………………………….. 09 INSERTING THE MATTRESS (TWIN) ………………………………………………………. 10 ADDING AND REMOVING THE COVERLET .……………………………………………. 11 WASHING &...
Page 19
DO NOT use the The Safety Sleeper® if any parts are missing or broken. Contact or write Abram’s Nation for replacement parts and instructional literature if needed. DO NOT substi- tute parts.
TECHNICAL SPECIFICATIONS Operating Conditions: The Safety Sleeper® is designed for normal indoor conditions. Storage Conditions: The Safety Sleeper® should be stored in the provided suitcase (30x18x12”) in ambient warehouse temperatures (15° to 25°C, or 59° to 77°F) at normal hu- midity levels.
Durability: The Safety Sleeper® is made of high quality, medical grade fabrics and aluminum and has an expected product life of at least 5 years. Materials Fabric & Mesh:100% Polyester Material Flame Resistant Bias Binding: 50% Cotton/50% Polyester Webbing: 100% Polypropylene...
ASSEMBLE FRAME BASE Assembly video also available at https://www.abramsnation.com/informational-downloads/assembly-disassembly/ STEP 1: Lay all six pieces labeled with a B# (B1-B8) on the ground with labels facing up. STEP 2: Connect B5 to B5, B6 to B6, B7 to B7, and B8 to B8 by pushing in button & sliding to- gether until button clicks into place.
ASSEMBLE FRAME TOP STEP 1: Lay out four top frame pieces labeled T1, T2, T3, and T4, then connect by pushing in button & sliding together until button clicks into place. STEP 2: Repeat for second top support using pieces with T5, T6, T7, and T8 STEP 3: Hold the T1-T4 vertically and line it up with the black connector on the outside of the B3 and B4 joints, making sure support pieces are facing towards the center of the frame and...
ATTACHING ENCLOSURE TO FRAME STEP 1: Although the bed may be used directly on the floor, for added stability we recommend placing it on a bed frame (with or without a box spring) and using the provided stabilization straps to secure The Safety Sleeper frame to the bed frame.
INSERTING THE MATTRESS For regular use in the home, your Safety Sleeper is intended to work with a standard 10” tall twin mattress (not provided). We provide an air mattress and suitcase for use when traveling. HOME Twin: Regular 10” tall Twin Mattress (not provided) Australian &...
ADDING AND REMOVING THE COVERLET The Safety Sleeper utilizes a coverlet design that creates a completely enclosed pocket for the mattress. The coverlet can easily be swapped out and washed (for more, see the “Washing and Care Instructions”). WARNING: A Coverlet must be used at all times to avoid risk of entrapment between the mattress and the enclosure.
WASHING & HANDLING INSTRUCTIONS WASH BEFORE FIRST USE Materials Fabric & Mesh:100% Polyester Material Flame Resistant. Bias Binding 50% Cotton/50% Polyester. Webbing: 100% Polypropylene. Washing Instructions DO NOT USE DO NOT USE FABRIC SOFTENER DO NOT DRY CLEAN DO NOT USE BLEACH Machine wash on delicate cycle in either a front loading washing machine or a top-loading machine without a center agitator.
SUITCASE PACKING INSTRUCTIONS The Safety Sleeper® is designed to also travel and comes with a suitcase and air mattress. Below is our recommended method for packing the suitcase. 1. Lay triangular frame pads on left side. 2. Carefully place folded enclosure over the frame pads.
SUITCASE PACKING INSTRUCTIONS The provided air mattress is intended only for use within a secured coverlet and a fully zipped mattress pocket zipper. The following safety tips are provided by the air mattress’s manufacturer. Air Mattress Safety Tips Always keep your airbed fully inflated when in use. Never use an airbed in water.
Regulations and Testing Compliance The Safety Sleeper® uses medical grade flame retardant fabrics and is subject to and compliant with the following regulations. FDA Registered Medical Device Operator: 10048434 Registration: 3011389091 Listing: D234571 CE Marked ...