inventum IKI9045FLOW Installation Manual page 27

CONNECTING THE APPLIANCE
Note:
The appliance has three mains plugs: two for the induction hob and one for the cooker hood.
1. Make sure that the electrical system is suitable for the load of the appliance.
2. Make sure that the mains socket is grounded.
3. Connect the appliance to the mains supply.
After connecting the display of the appliance lights up for a short time. The appliance is ready for use.
FINISHING THE INSTALLATION
1. Put the grease collector (A) in the opening.
2. Put the grease filter (B) in the grease collector.
3. Install the glass valve (C):
a. Put one side of the valve in the opening on the side.
b. Push the slider on the other side of the valve.
c. Put the other side of the valve in the opening and release the slider.
(Figure 26)
(Figure 27)
(Figure 28)
English • 27