Subscribe to Our Youtube Channel
Related Manuals for Mountfield Oval
Summary of Contents for Mountfield Oval
- Page 1 Oval and Extended Oval Roofing Systems Assembly and Operation Manual Version of 2 September 2007...
-
Page 2: Basic Information
Recommended tools: a rubber mallet and a round file. Don‘t erect or handle the roofing system in windy weather. 3. List of Components, the Content of Package Oval Extended Position on Description Oval Version Version drawings v obrázcích Cotter pin Coupling 1 Coupling 2... - Page 3 (L). Both cotter pins should be inserted from the same side of the coupling with the pin noses facing the arch centre (see Fig. 1). Using the same steps, assemble the four half-arches required for the oval roofing or six half-arches for the extended oval roofing.
- Page 4 (see Fig. 4). Assemble the four parts with joints designed for traversing. For the extended oval roofing there are 2 additional T-piece with wheels and two tubes cut trough on their both sides, without the pressed-on joints. Using these parts, assemble additional two units.
- Page 5 Step 5 Connection the arches to form the load-bearing structure Assembly three longitudinal connecting tubes (6 pcs for the extended oval roofing), each using one tube ∅ 40 (C), two couplings (K) and two cotter pins (L) (See Fig. 6) C –...
- Page 6 For the extended oval roofing connect the three arches in the same way, placing the arch without joints in the middle. G – Plastic part of the anchor Fig. 7 The basic structure of the roofing is now assembled and its further erection will continue with the canvas unrolled.
- Page 7 B – Arch ∅ ∅ ∅ ∅ 20 mm Fig. 8 C – Longitudinal connecting tube ∅ ∅ ∅ ∅ 40 mm E – Joint F – Traversing wheel G – Plastic part of the anchor Fig. 9 OVAL 7/17...
- Page 8 A – Arch ∅ ∅ ∅ ∅ 40 mm B – Arch ∅ ∅ ∅ ∅ 20 mm C – Longitudinal connecting tube E – Joint F – Traversing wheel G – Plastic part of the anchor L – Cotter pin Fig. 11 OVAL 8/17...
-
Page 9: Operation
– unfasten the zip fasteners and using the tube installed in the door sleeve roll the door up and secure it by the pair of straps (see Fig. F in Part 10 – Illustrated Supplement); OVAL 9/17... -
Page 10: Safety Rules
If it is intended to store the roofing for the winter period, it should be carefully disassembled and stored in a dry cold place to protect it from damage. The manufacturer shall not be responsible for any possible damage caused by any non-observance of the instructions contained herein. OVAL 10/17... - Page 11 The conditions of granted warranty are specified in the warranty certificate of the seller. Direct, please, any your questions and requests for service and spare parts to your supplier of this product. It is highly recommended to employ only the genuine spare parts for any repair/maintenance of the product. OVAL 11/17...
- Page 12 Figure C: Attachment of the canvas to the lower Figure D: Insertion of the plastic tube (N) in the connecting tube (C) door sleeve Figure E: Location of the door strap on the Figure F. Door in its pen and secured position spacer tube (D) OVAL 12/17...
- Page 13 Figure H: Detail of the strap in fixing the arches in the open position by straps. the open position Figure I: Roofing anchor system - from the left: Anchor to be set in concrete, foam pad, plastic part of anchor, in-bush wrench OVAL 13/17...
- Page 14 11. Indicative dimensions of the OVAL roofing and the layout of anchors Frame type: AZURO OVAL 4,1 x 6,2 m OVAL 14/17...
- Page 15 Frame type: AZURO OVAL 4,9 x 7,0 m OVAL 15/17...
- Page 16 Extended frame type: AZURO OVAL 4,1 x 8,1 m OVAL 16/17...
- Page 17 Extended frame type: AZURO OVAL 4,9 x 8,9 m OVAL 17/17...
Need help?
Do you have a question about the Oval and is the answer not in the manual?
Questions and answers