Advertisement
Quick Links
Advertisement
Summary of Contents for Kauber V UltraSlim
- Page 1 Assembly instructions KAUBER V UltraSlim Lift...
- Page 2 Thank you for choosing KAUBER The KAUBER V UltraSlim Lift is a top-of-the-line, ultra slim lift for professional installations, designed for installation on suspended ceilings or for open installations. The utilized drive guarantees stability and uniformity. Limiters ensure safety of use. The lift is driven by a reliable Somfy motor and can be used with most multimedia projectors available on the market.
-
Page 3: Exterior Dimensions
Exterior dimensions: - 3 - w w w . k a u b e r . e u... - Page 4 Lift assembly: 1) Assemble the base of the lift to the structural ceiling using screws and rawlplugs adequate to ceiling type (assembly points are shown on the image below). Remember to prepare an adequate opening in the suspended ceiling for the installation.
- Page 5 Lift assembly: 2) Connect power supply to lift in order to make sure that the assembly was conducted correctly. The lift can be controlled manually (switch) or with the help of the remote control (radio steering). Steering assembly requires only connecting the lift steering conductor to the controller / switch.
- Page 6 Lift assembly: 3) Fasten assembly grips to the projector using provided screws. - 6 - w w w . k a u b e r . e u...
- Page 7 Lift assembly: 4) Attach the projector, with fastened grips, to the lift’s bottom base. Slide in the projector from the bottom and fasten to the top using provided screws. - 7 - w w w . k a u b e r . e u...
- Page 8 Lift assembly: 5) Fasten the 4 threaded pins to the masking panel as shown on the illustration below. If the pins are too long they may be cut to an appropriate length. - 8 - w w w . k a u b e r . e u...
- Page 9 Lift assembly: 6) Attach the masking panel to the lift. Position the 4 pins in the openings on the base of the lift and tighten the bolts as shown on the image below. - 9 - w w w . k a u b e r . e u...
- Page 10 Please note: 1) Lift installation should be conducted by a qualified installer, in accordance with instructions provided in this manual. 2) Power connection should be conducted by a qualified electrician. 3) Use screws and bolts adequate to ceiling type. During ongoing motor operation, the built-in thermal switch may automatically turn off the motor.
- Page 11 - 11 w w w . k a u b e r . e u...
- Page 12 Thank you for choosing the KAUBER V UltrSlim Lift Feel free to view the entire KAUBER product line.