Table of Contents
Advertisement
3
SETTING UP
3.1
INSTALL THE MACHINE.
1
Place the machine on a flat surface and in a suitable large area with at least
50 cm open space around the machine.
2
Fill the fluid tank with MAGICFX
3
Connect the machine to suitable rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
WARNING
4
Turn on the machine and allow it to heat up. Heat up takes approximatly 5
mintues. Once the machine has reached operating temperature, the LCD
display will show "Ready To Fog". Now the machine is ready for operation.
5
To start making fog, locate the OUTPUT button on the control panel, and press
the button to start making fog.
6
To turn off the machine, press STOP button and turn POWERCON TRUE1 to the OFF
position.
10
MAGICFX
SMOKEJET — User and Installation Manual
®
®
Always connect the machine to a protected circuit and ensure it
is properly grounded to avoid risk of electrocution.
approved fluid.
Advertisement
Table of Contents
