Table of Contents
Advertisement
Quick Links
AX-DL100 - Laser Distance Meter
1. Overview
Thanki you for choosing our products!
Please carefully read this product Quick Start to ensure the safe and most efficient use of this product.
Designed by globally recognized team, the AX-DL100 laser distance meter is compact and handy. The
innovative design with clip accessory enables user to bring the meter anytime as well as it also protect the
batterites broken out when drop on the ground in operation.
2. Warning
Laser Class 2 products;
Do not look directly into the beam with optical aids or direct it towards other people unnecessarily.
Advertisement
Table of Contents
Related Manuals for AXIOMET AX-DL100
Summary of Contents for AXIOMET AX-DL100
- Page 1 Please carefully read this product Quick Start to ensure the safe and most efficient use of this product. Designed by globally recognized team, the AX-DL100 laser distance meter is compact and handy. The innovative design with clip accessory enables user to bring the meter anytime as well as it also protect the batterites broken out when drop on the ground in operation.
-
Page 2: Button Functions
3. Button functions 1. Measure button 2. Add(+) button 3. Area / Volume / Pythagorean button 4. Measuring reference button 5. Subtract(-) button 6. Historical memory button 7. Unit button 8. ON/OFF/Clear button... -
Page 3: Lcd Display
4. LCD display 1. Laser on 2. Reference point (front) 3. Reference point (rear) 4. Distance /Continuous measurement 5, 6, 7, 8. Measuring mode indication 9. Battery status 10. Value 1 11. Value 2 / Min value 12. Value 3 / Max value 13. - Page 4 Adjusting Measuring Reference Press (4) to switch reference point between the front and the rear of the instrument. There is a beep warning tone when reference point is changed. The default reference setting is from the rear of the instrument. The reference point will be set to default every time when it’s powered off, i.e.
- Page 5 Area Measurement Press (3) once, the symbol appears in function filed of display. Press (1) to take the first distance measurement (e.g. Length). Press (1) again to take the second distance measurement (e.g. width). The results of length, width, perimeter and area are displayed in the screen. 1 - the first distance 2 - the second distance 3 - the perimeter...
- Page 6 Refer to figure 1. Press (3) 3 times to activate the function, the symbol appears in the function field on the display. Take measurement with the 2 points shown on the figure in numeric sequence, the height of the object will be calculated automatically and displayed on screen.
- Page 7 Refer to figure 2. Press (3) 4 times to activate the function, the symbol appears in the function field on the display. Take measurement with the 3 points shown on the figure in numeric sequence, the height is calculated and displayed on the summary line. Press (8) to delete any measured length and then press (1) to re-measure.
-
Page 8: Troubleshooting
500 // Hardware error // Switch on/off the device several times. If the symbol still appears, please contact your dealer for assistance. 8. Specification Specification // AX-DL100 The maximum measuring range* // 100 m Measuring accuracy** // ±2 mm Measuring units // m / ft / in / ft+in Laser class // Class 2 Laser type // 630-670nm, <... - Page 9 Beep // 4-line display with backlight // Historical memory // 20 sets Button // Soft rubber butons Operating temperature // 0°C-40°C Storage temperature // -10°C-60°C Battery life // 5,000 measurement times Battery type // AAA 2 x 1.5V (not included) Auto laser off // 30 seconds Auto instrument off // 180 seconds Dimensions (mm) // 120*50*29...
-
Page 10: Battery Insertion
10. Battery insertion Open the battery compartment then insert batteries according to the direction incon in the compartment. For safety, please close the compartment with the provided lid after battery insertion.
Need help?
Do you have a question about the AX-DL100 and is the answer not in the manual?
Questions and answers