Advertisement

Quick Links

955768

Features:

Radio Controlled Clock (433 MHz) with manual time setting option.
Manually set the time.
Weather forecast with symbols for sunny, partly cloudy, cloudy, wet and rainy
weather
Calendar
Time display in 12 or 24-hour format
Temperature display in C or F
Alarm function for two alarm times.
Measuring range:
Indoor temperature:
Humidity:
Outdoor temperature:
Barometer:
MAX/MIN memory for humidity, indoor and outdoor temperature
Battery status indicator for remote sensor.
Range of remote sensor 30 metres (in open area)
Power save function, by pressing the "SNZ" button once, the screen switches off
without losing values. Press the "SNZ" button to switch on again.
Batteries:
-
Base station:
mA (included)
-
Sensor:

Settings:

Connect the adapter to the base station, then insert the batteries.
After 3 seconds the LCD screen will light up, showing the various symbols.
The base station will display the temperature/humidity and barometric
values.
The base station will automatically start detecting the wireless remote
sensor for 3 minutes.
The base station then starts the DCF signal (to receive the radio controlled
time) for 7 minutes.
0C - +50C
20% ~ 95%
-40C - +70C
800~1100 HPa
3 AAA batteries (not included) and adapter DC4.5V/200
2 AAA batteries (not included)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 955768 and is the answer not in the manual?

Questions and answers

Summary of Contents for Balance Meteo 955768

  • Page 1 955768 Features:  Radio controlled clock (433 MHz) with manual time setting option.  Manually set the time.  Weather forecast with symbols for sunny, partly cloudy, cloudy, wet and rainy weather  Calendar  Time display in 12 or 24-hour format ...
  • Page 2 Radio controlled clock:  After the device is switched on, the clock will automatically search for a DCF time signal. flashes to indicate that the device is searching for a DCF signal. is continuously visible to indicate that the device has received a DCF signal and the correct time/date is then being displayed.
  • Page 3 Manually setting the time:  Press the “MODE” button for at least 2 seconds to adjust the clock/calendar settings.  Press the “UP” or “DOWN” button to adjust the settings and then press the “MODE” button to confirm each setting. ...
  • Page 4 Temperature and Humidity: C and F  Press the “DOWN” button to switch between  If the outside temperature is out of the measuring range, the display shows the message LL.L (lower than the minimum temperature) or HH.H (higher than the maximum temperature). ...
  • Page 5 means partly cloudy. means cloudy. means wet. means rainy. Freezing point warning:  If the outdoor temperature drops to between -4C and +1C, the icon will flash on the screen. If the temperature gets below -4C the icon permanently visible on the screen. DISPOSAL AT END OF WORKING LIFE: Discarded appliances and electronic devices often still contain valuable materials, therefore do not throw them away, instead hand them in to the store where you buy...
  • Page 6 future, do NOT discard it with the household waste, but hand it in at your local refuse collection depot. In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not be discarded with domestic waste but should be disposed of separately for recycling.

Table of Contents