Reset Settings; Firmware Update - Conrad 860559 Operating Instructions Manual

36. Reset Settings

• Press the "MENU" button (3) for approx. 4 seconds.
• Use the buttons "Up" (5) or "Down" (4) to select the menu item System Settings
• Push the button "Confirm" (9).
• Select the buttons "Up" (5) or "Down" (4) in the mode "Reset settings".
• Push the button "Confirm" (9).
• Use the buttons "Up" (5) or "Down" (4) to select between "no" and "yes".
• When selecting "No" and pushing the confirmation button (9), the display will automatically return to
setting mode.
• Push the button "MENU" (3) to leave the setting mode to get to recording mode.
When selecting "Yes" and pushing the confirmation button (9), all settings are dele-
ted and returned to the original condition (at purchase of the camera).
• The display automatically jumps back to recording mode after confirmation and reset.

37. Firmware Update

• Press the "MENU" button (3) for approx. 4 seconds.
• Use the buttons "Up" (5) or "Down" (4) to select the menu item System Settings
• Push the button "Confirm" (9).
• Select the buttons "Up" (5) or "Down" (4) in the mode "Firmware update".
• Push the button "Confirm" (9).
• Use the buttons "Up" (5) or "Down" (4) to select between "Cancel" and "Start".
• When selecting "Cancel" and pushing the button "Confirm" (9), the display will automatically return to
setting mode.
• Push the button "MENU" (3) to leave the setting mode to get to recording mode.
• When selecting "Start" and pushing the button "Confirm" (9), the display will show "Please load the
firmware anew from the homepage".
• Use the included USB extension cable between the camera and your PC or laptop as described in item
"9 Charging the battery" or item "39 Connection to a PC or laptop".
• Push the button "Confirm" (9) after selection.
• The display automatically jumps back to setting mode after confirmation.
• Push the button "MENU" (3) to leave the setting mode to get to recording mode.
60