Reset Bios To Default Configuration - TCi A12-3 Operating Manual

3.2 Reset BIOS to default configuration

If you set the BIOS configuration to "default" or "optimized", the following settings have
to be effected before saving:
BIOS:
PowerOn after PowerFail: ON
This setting ensures system's restart - without pressing On/Off - after a power outage has
occured.
Systems which use LVDS interrupt for TFT control have to be configurated depending
on display diagonal:
12" TFT 800 x 600
15" TFT 1024 x 768
17" TFT 1280 x 1024
19" TFT 1280 x 1024
If this setting has not been effected, it can only be made up by an additional display
connected on the external VGA interrupt.
Ludwig-Rinn-Str. 10-14
18Bit
24Bit
48Bit
48Bit
D - 35452 Heuchelheim Phone: +49-(0)641-96284-0 Fax: +49-(0)641-96284-28 www.tci.de
Seite 11 von 28