Page 3
Operating manual GGO -, GGA -, GOO -, GOG - Z11.0.0X.6C-21 page 3 of 8 1.3. Skilled personnel Users of the readily installed device have to be sufficiently skilled in the operation of the device and able to avoid risks. The operator of the arrangement is responsible for sufficient qualification the operators.
Page 4
Operating manual GGO -, GGA -, GOO -, GOG - Z11.0.0X.6C-21 page 4 of 8 1.6. Safety guidelines 1. Faultless operation and reliability in operation of the measuring device can only be assured if the device is used within the climatic conditions specified in the chapter “Specifications“. Sensors are not allowed to used in „under-water-diving-application”...
Page 5
Operating manual GGO -, GGA -, GOO -, GOG - Z11.0.0X.6C-21 page 5 of 8 *) Application in higher CO concentration The GOEL 381 and 380 is designed to measure oxygen-concentration in air or other gases without larger CO concentration. Higher CO -concentration reduces the life-time of the sensor.
Page 6
Operating manual GGO -, GGA -, GOO -, GOG - Z11.0.0X.6C-21 page 6 of 8 3. Application of the different sensor types 3.1. GGO housing (closed sensor) For measurements at atmosphere and in systems without over or under pressure the GGO... is sufficient. Additionally the GGO can be screwed tightly into systems with small over or under pressure.
Page 7
Operating manual GGO -, GGA -, GOO -, GOG - Z11.0.0X.6C-21 page 7 of 8 5. How to operate Treat device and sensor carefully. Use only in accordance with above specification. (do not throw, hit against etc.). Protect plug and socket from soiling. ...
Need help?
Do you have a question about the GGO Series and is the answer not in the manual?
Questions and answers