Page 1
Limited Warranty JS Source Technology, LLC guarantees the UM-1 / UM1-A to be free of defects for the product’s warranty period of 5 years. The warranty period begins on the original date of shipping. The lim- ited warranty is intended only for the original purchaser. The warran-...
Page 2
12-15 lbs. when mounting above the TV using the stock TV stand (max weight varies depending upon how wide the stock TV base The UM-1 is designed and tested to mount a Fusion Series Soundbar, or Elite Closed Back Enclosure below the TV when using a TV mount within ...
Page 3
Please note: There are left and right side parts to this assembly the TV (Vertical Support/Depth Support) Once assembled, the UM-1 bracket locations can be swapped to fit an assortment of required installations Height Adjust- ments Height Adjustment is...
Page 4
Fusion Series Soundbars Below the TV—Drill a pilot hole and se- spacers will not be needed cure to the UM-1 bracket Depth Support using two #10 5/8” long screws and associated washers per bracket (included) If your TV has bump outs, spacers ...
Page 5
Supports 300mm to 600mm VESA patterns Mount the L/R sides of the UM-1 bracket to the back of the TV fol- lowing steps on page 8 For 600mm spacing, swap the UM-1 Sandwich brackets so that the...
Page 6
Mounting SONOS® PLAYBAR using Secure the UM1-A adapter bracket to the back of the PLAYBAR® Wall Mount Kit SONOS® ARC by using the provided hardware in this recommended order: 18mm M5 bolt, lock washer, flat washer, fender washer and then into the SONOS®...
Need help?
Do you have a question about the UM-1 and is the answer not in the manual?
Questions and answers